Tapit tape fail

[Tinytom]

The main reason for the fail here is the ridged surface its applied to.
Its adhesive tape at the end of the day and surface needs to be flat.
it would have been good to scrape old tile adhesive of in local areas of tape.
That combined with amount of time between application and use would not help.
It's all very good feedback though and it will be bang on when launched.

It peeled off the bead worse than the wall

 

[smoother09]

Think poundstrecher might still be interested though!!! Take the deal!

 

[tapit]

Cracks are beginning to appear not only in your walls also in your story's jackanory!!

For example?

 

[tapit]

It peeled off the bead worse than the wall

Where did you buy beads?

 

[smoother09]

For example?

It's failed shut up shop before someone gets a bead in there eye it clearly dangerous!

 

[smoother09]

Where did you buy beads?

Over 400 deaths a year because of unsafe practice on building sites! Dangerous product! Discontinue as of today or I will report you to the health and safety authorities

 

[smoother09]

I'm hearing stories about beads dropping off window heads all over the internet and on the street! This must stop now!!! There's public Chao's!

 

[smoother09]

Is it ok to pink grip the tape and then fire some nails through it so it stays on? Just asking for a friend

 

[smoother09]

That piece that's stuck outside on your wall that's been there for 3 months in the wind and rain how do we know you didn't aroldite it lol but suspicious now after there peeling off overnight! Must of been a bad batch

 

[Tinytom]

Where did you buy beads?

Tp

 

[smoother09]

IL stop now till later busy sticking some beads! Pain in ass takes forever to go off! If only there was another method mmmmmmmmm there isn't f**k it IL crack on and go get a butty sat there knowing they will still be on when I get back feels very satisfying x

 

[Retired Spread]

 

[The Hobo]

Yes but is it faster or cheaper than staples?

The best thing I could see about it is it being handy where you'd otherwise struggle to get a fix.

Many is the time that I've done my nut in trying to get washer nails into old block or brick.

Go into the block and it breaks. Go into old mortar and it crumbles.

And then you hit your f**k**g thumb....

Other than that, all seems to be sewn up already

nothing wrong with a warm thumb on a frosty morning lol

 

[stuart23]

Can’t believe the amount of people that are actually willing this to fail, guys trying to better himself and is getting hammered for it.

 

[Neilevs18]

Hook on beads all the way for me! Used them once and never looked back

 

[The Hobo]

I'm out.....was never in!

hes sounding more like del trotter as time goes on

 

[Deleted member 32554]

Oh ffs

Will there be a mark two ?

Hook on beads all the way for me! Used them once and never looked back

How much you paying ( inc vat ) ?

 

[Neilevs18]

How much you paying ( inc vat ) ?

I dont pay for them mate I work for a housing association so i just book them out. Selco I get them from. Saves so much hassle trying to get a fixing especially on solid walls.

 

[Retired Spread]

Can’t believe the amount of people that are actually willing this to fail, guys trying to better himself and is getting hammered for it.

think majority of it is banter pal.....only odd one or two jealous/envious because they didn't think of it

 

[Tinytom]

I dont pay for them mate I work for a housing association so i just book them out. Selco I get them from. Saves so much hassle trying to get a fixing especially on solid walls.

Iv used them once on board, they any good on reskims? Can’t imagine they are

 

[Tinytom]

And for the tile adhesive haters
Before

During

After

 

[Neilevs18]

Iv used them once on board, they any good on reskims? Can’t imagine they are

Yes I always use them on reskims mate. Even on sand and cement walls they stay on fine, even the heads. I have had to put a nail in either side if there's a belly in the wall but if the walls are good they'll stay on no problem, from my experience anyway.

 

[Deleted member 40920]

And for the tile adhesive haters
Before View attachment 39523
During
View attachment 39524
After View attachment 39525

Do you charge extra for the ripples?

 

[choppa]

Where did you buy beads?

I even said the tape didn’t stick and I was doing plaster board sky lights to fiddly not that sticky and to time consuming for me it’s like a s**t version of gaffa tape. Maybe new skimmers will wank over this new tape but your not fooling me any more.

 

[choppa]

View attachment 39499

Ps learn how to make nice straight lines f**k is this s**t.

 

[Neilevs18]

Iv used them once on board, they any good on reskims? Can’t imagine they are

QUOTE="Neilevs18, post: 1282992, member: 40493"]
Yes I always use them on reskims mate. Even on sand and cement walls they stay on fine, even the heads. I have had to put a nail in either side if there's a belly in the wall but if the walls are good they'll stay on no problem, from my experience anyway.
[/QUOTE]
Give them another go mate I swear by them, havent used the normal ones ever since. They would have been ideal on the job you've just done. Just watch your hands cos they're sharp as f**k

 

[Deleted member 32554]

QUOTE="Neilevs18, post: 1282992, member: 40493"]
Yes I always use them on reskims mate. Even on sand and cement walls they stay on fine, even the heads. I have had to put a nail in either side if there's a belly in the wall but if the walls are good they'll stay on no problem, from my experience anyway.

Give them another go mate I swear by them, havent used the normal ones ever since. They would have been ideal on the job you've just done. Just watch your hands cos they're sharp as f**k
[/QUOTE]
Not bad

Plaster Beads 50x HOOK ON Drywall Plasterboard Thin Coat Steel Angle Bead 2.4M | eBay

Find great deals for Plaster Beads 50x HOOK ON Drywall Plasterboard Thin Coat Steel Angle Bead 2.4M . Shop with confidence on eBay!

www.ebay.co.uk

 

[Tinytom]

Do you charge extra for the ripples?

Does your mrs?

 

[Neilevs18]

any good on reskim?

Yes mate use them all the time i find them great

 

[lurpak]

I think the tape has legs..
Just needs a bit more refining...

Can’t believe the amount of people that are actually willing this to fail, guys trying to better himself and is getting hammered for it.

Guys a prick mate. If he came with an idea and the right attitude it would be different.

It’s a bad idea. Few of us said from the start.. he took offence. Which shows 0 business sense. And of course, it failed. And he still just looks for excuses.

 

[Retired Spread]

Do you charge extra for the ripples?

 

[lurpak]

And for the tile adhesive haters
Before View attachment 39523
During
View attachment 39524
After View attachment 39525

nice mate. I do exactly the same. Knock loose off. Bonding60 to cover. Skim. All done home by the time
These pussies still cutting boards up n making bathroom smaller

 

[The Hobo]

View attachment 39526

fancy that

 

[Deleted member 40920]

nice mate. I do exactly the same. Knock loose off. Bonding60 to cover. Skim. All done home by the time
These pussies still cutting boards up n making bathroom smaller

Maybe so but I'd like to see a straight edge on that. Didn't you have to go back to a bathroom not to long ago because your wall was too pissed to tile on.... Oops

 

[Neilevs18]

So this is a tape designed for sticking beads to walls, that fails to stick beads to walls? Which means it's completely pointless? Or am I missing something here