whats your processes for putting it on and troweling it up?
At the knauf day the guy there sprayed it on sponged it then gave it a few trowels and his finish was shite.
currys wall was ok but didnt see how he did it and everyone else didnt do great so im none the wiser.
dunno? i dont think i was awake when i posted it :RpS_confused: im sure they said its got clay in it :RpS_unsure:why are you in the clay section ... :RpS_confused:
:RpS_laugh: say what you see
just two coated it like multi with the tyzack. second coated right after the first. second coat went in real nice. then finished with the tyzack and very very light mist from the pump action. then dry trowelled. it was just the timings that i found different. plus it was like your trowelling velvet or something. really nice. and on the reskim parts it was pulling in pretty quick, like you'd expect.
just had the ccf bloke on the phone today to say he's sending out the trade card. be interesting to see what it's priced at. been paying about £7.60 a bag or something. should have tried the tp trade card with them but didn't think. probably wont be much cheaper anyway.
going to throw loads on with the h/s/l next week because of the set. it'll be sink or swim ....
if i had 2nd coated the ceiling i did on sat it would have took 4 hours (fuk that) i never 1 coated with multi and the reason i did with the mp is because of the demo we went on.
Ill 2 coat next time and just do a big hit with it.
Chlemo why do you put 2 coats on if you do it by hand and only 1 with a machine?One coat when spraying it mp. 2 coats by hand put your secand coat on about 30 min after first coat. 2 more trowels after that finished. That's over bored. Reskim put your secand coat on about 40 min after first coat 2 more trowels finished. I don't use water.
Chlemo why do you put 2 coats on if you do it by hand and only 1 with a machine?
No mate I was 17 then and more than likely to pissed lol
What was that all about then?
if i had 2nd coated the ceiling i did on sat it would have took 4 hours (fuk that) i never 1 coated with multi and the reason i did with the mp is because of the demo we went on.
Ill 2 coat next time and just do a big hit with it.