Won’t work if the paint is oil basedAfter speaking to rendit they said parex do a product that burns through the paint and keys to the render underneath.. but said if I then use k rend on top it wont have warranty.
Best way to tackle this as customer not wanting to take the old render of
That's what they saidWon’t work if the paint is oil based
He says it's not oil base . So if I used the stuff from parex is that guaranteed to work .Won’t work if the paint is oil based
It’ll work yeah. I think it’s easier to just scrim and pin it. It’s mechanically fixed thenHe says it's not oil base . So if I used the stuff from parex is that guaranteed to work .
He says it's not oil base . So if I used the stuff from parex is that guaranteed to work .
Only my opinion which means nothing but if that was my job I’d Bosch breaker it off you think parex would come help you if it dropped off ? No way, would they f**kCheers for advice boys. Moneys defo there
Why Bosch breaker you wouldn't happen to have a new one would you lol. Going with @Rossi46 advice bang some on and see if it's still there after a few days before top coatOnly my opinion which means nothing but if that was my job I’d Bosch breaker it off you think parex would come help you if it dropped off ? No way, would they f**k
Would have that off in thirty minutes brother
Just give it a good brush or wet it down as wellMake sure the paint is well clean first. Nothing sticks to dirt.
Bit of a daft way of looking at it that. you could say that about most products, as long as your clued up and know the substrates and know the products.Only my opinion which means nothing but if that was my job I’d Bosch breaker it off you think parex would come help you if it dropped off ? No way, would they f**k
You love the Turkish render Geezer don’t ya!! LolOne of probs is it kn street people walking buy . Cars etc.
Ok it's for Turks and he dont want knock it off lol
Mate if I could work for these all time I would . Not had one prob with em . Even when they joked bout putting us in meat grinder .You love the Turkish render Geezer don’t ya!! Lol
Like unifinish??Bit of a daft way of looking at it that. you could say that about most products, as long as your clued up and know the substrates and know the products.
Every parex stockists keeps parinter ?? It has the correct BBAswe have used parinter on painted render with no problems. i don't think anyone will guarantee your application.
parinter has not got a british standard kite mark, so builders merchants will not stock it.
the titanic was up to british standard and you remember what happened to that !
Not cheaper to just remove old render ?View attachment 37397View attachment 37398no problem over paint if u have the right materials. That's bauprotec RHS as a bace coat 1 bag. And 2 begs of bauprotec 850m ocr as a top coat. That wall was cracked like f**k. It's my father in laws garden walls. Doing it for free lol just because I love it
We have just done one.i think we got about 3 to 4 metres per bag but you save on top coat and microNot cheaper to just remove old render ?
The cost of gears not a problem fornthisNot cheaper to just remove old render ?
NoNot cheaper to just remove old render ?
Travis stock it Malc.we have used parinter on painted render with no problems. i don't think anyone will guarantee your application.
parinter has not got a british standard kite mark, so builders merchants will not stock it.
the titanic was up to british standard and you remember what happened to that !
You can check whether the paint is oil based by using a blow torch on it. If it bubbles and burns it's oil based, if it just goes brown and smoulders it's water based.He says it's not oil base . So if I used the stuff from parex is that guaranteed to work .
Travis stock it Malc.