Topspread16
Latest activity Postings About
-
-
Topspread16 replied to the thread Help Needed to save this Pls.Chuck a couple of handfuls of dot in it. -
Topspread16 replied to the thread Please advise the best options after ruining the walls with an expired multifinish.You’ll be surprised what paint covers @John j
-
Topspread16 replied to the thread Rolling Gauge.Stilts for me, any higher tower scaff on wheels.
-
Topspread16 replied to the thread Rolling Gauge.Piggyback, he doesn’t by needless tools.
-
Topspread16 replied to the thread Rolling Gauge.Cheers John.
-
Topspread16 replied to the thread No van.You’d be better off with a merc with 100k on the clock than the 2.0 custom. Hear all sorts of problems with them, bloke at work just had...
-
Topspread16 replied to the thread No van.How much you after spending smudge? Sort of mileage?
-
Topspread16 replied to the thread Plastering over artex photos.@John j your time to shine, you will struggle to work out which is before and after. If there is no timber left in the room that’s the...
-
Topspread16 replied to the thread 9.5mm boards.John works there 3 days a year.
-
Topspread16 replied to the thread 9.5mm boards.Tenner a day :rayos:
-
Topspread16 replied to the thread Best rendering system to use on a whole house re-render job?.@themucky1
-
Topspread16 replied to the thread Best rendering system to use on a whole house re-render job?.@mucky1 @Tramp down your way.
-
Topspread16 replied to the thread Red brick.
-
Topspread16 replied to the thread Dot and Dab Alternative.They do quadruple strength at Tesco, only need a splash.
-
Topspread16 replied to the thread Dot and Dab Alternative.Well it’s took a chunk of brick with it so I think it stuck ok. Weak pva dab and skim. Float in sand and cement and skim.
-
Topspread16 replied to the thread Dot and Dab Alternative.Covering their neck letter by any chance?
-
Topspread16 replied to the thread Dot and Dab Alternative.f**k**g common brick with s&c mortar :muyenojado:
-
Topspread16 replied to the thread 9.5mm boards.Most my jobs are ali, if they haven’t put add ons either side you’ve had it.
-
Topspread16 replied to the thread 9.5mm boards.Same as Tony, painting dab on the back so joiners can get skirts onto door reveals. Sorting other folks cock ups.
-
Topspread16 replied to the thread Dot and Dab Alternative.Biggest mountain out of a mole hill award goes to ……………… @Sam9696. :numberone:
-
-
Topspread16 replied to the thread Queueing for 4 hours....I don’t think he’d be that cool. More than likely teaching English folk English phrases on every street corner till he gets punched.
-
Topspread16 replied to the thread Queueing for 4 hours....Raising awareness for transgender plasterers. Poor c**t must of jogged to work too
-
Topspread16 replied to the thread Discounts go here ...If you haven’t got one of these already here’s a good chance to get one for under £500. Offer ends tonight only through FFX EBay store.
-
-
Topspread16 replied to the thread External angle bead.
-
Topspread16 replied to the thread How to rectify this?.
-
Topspread16 replied to the thread Anyone in south wales way?.Well if plastering fails, only fans isn’t really an option either with a name like that. :nocausagracia:
-
Topspread16 replied to the thread Plaster falling off wall.Jesus wept, get the room tidied and get a plasterer round.
-
Topspread16 replied to the thread Can Plastering make me Rich?.Bark finish
-
Topspread16 replied to the thread Can Plastering make me Rich?.Skimmed more artex than lurpak
-
-
Loading…
-
Loading…
