I mean the hoses blocking while I'm laying mesh in..What do you mean by blocks?
Spray on the wet side size 8mm cap. Rendaid is known to chew up rotar and stators.
Did you rip bags on the hopper and machine mix it or did you mix and pour it in to machine mate ?Sprayed rendaid yesterday. Nice and stiff on speed 2. Didn't have a single problem.
Fair play tbh I’m always absolutely paranoid about blocking anything up with my machine to the point of nervous breakdown sometimes, never seen rendaid being sprayed or knew it could be , product wise I think it’s really good , trowels on ok to but again I do get para about it even sticking to my mixing tubs never mind my machine if I left it to long , might have a rethink for a job got coming up suppose on a fair sized area it really would help to spray itBags in the hopper mate.
I've learnt to keep it half full with my labourer ready to reverse if it jams.
Since I've used the generator instead of mains I've had no issues
Speed 7 about 225 VinceyFor ritmo users would we keep the water higher than normal then with rendaid and speed lower ? 4/5 ?
Another day off spraying top coat and rendaid through my m200. Speed 2.Speed 7 about 225 Vincey
Miles easier, have you got the twister spat? I use it for bedding mesh in.Another day off spraying top coat and rendaid through my m200. Speed 2.
Literally half the time over hand application
No I've not heard of it. Just use a trowel. Any good ?Miles easier, have you got the twister spat? I use it for bedding mesh in.
Get one, worth the money. Works better pressing the mesh in flatter to.No I've not heard of it. Just use a trowel. Any good ?
What should I search for ?Get one, worth the money. Works better pressing the mesh in flatter to.
Twister spatula just a normal spat but handle twists so you can hold like a trowel.What should I search for ?
Ryan will prob stock them at p1ss 2 thickness 1 for render 1 for skim.What should I search for ?
Too much spending on tools this month mate! But defiantly looks like a good thing to have.Ryan will prob stock them at p1ss 2 thickness 1 for render 1 for skim.
Probably but doesn’t feel like it strains as much as a big trowel.Too much spending on tools this month mate! But defiantly looks like a good thing to have.
Would a 18 trowel not do it ?
Too much spending on tools this month mate! But defiantly looks like a good thing to have.
Would a 18 trowel not do it ?
About £30-£40 I just played super market sweep when I got my ritmo at pft northern.I wish that was the case. I bought my first machine last month. I thought I'd be good with no generator.
Taylor wimpy put a stop to that with their supply your own power s**t. Along comes a generator. Now I've worked two weeks to pay for the generator.
Twister spat will wait but I could see how the extra leverage makes it easier than a trowel.
Just out of interest, how much are they ?