New Krend Silicone TC15 / TC30 thincoat render

[Alexander]

If you are looking for technical specifications to render onto insulation / boards / block / & other substrates as required using a thin coat render please forward any queries to me and i should be able to assist you with this,

Silicone TC is a ready to use organic resin render which is applied to provide a low maintenance textured finish. It is available in different textures and a wide variety of colours. Prior to application the substrate should be primed using Primer TC.

 

[plasterjfe]

Alex what krend basecoat do we use for eps insulation boards to then receive the silicone texture?

 

[Alexander]

to render onto EPS, you will use our HP14 basecoat (6mm), with mesh embedded into this whilst wet then topcoat to use will be our TC Primer and (1.5mm or 3mm) Silicone TC thincoat render topcoat. total thickness will be 8mm - if you would like a spec please forward email address and i will sort for you.

 

[plasterjfe]

John@jfe-rendersytems.co.uk

I know the process, but we have been waiting to see when a suitable EPS basecoat come onto the market, HP12 etc is no good for EPS. When did hp14 come out ?

 

[plasterjfe]

John@jfe-rendersytems.co.uk

Please could I have a technical data sheet for the hp14 also ?

 

[Alexander]

yes, we will sort for you.

 

[plasterjfe]

yes, we will sort for you.

Thanks Pal. look forward to using this and putting it to the jfe test