Arenino reviews?

Leeroy said:
I agree buddy but the customer wants silicone tc finish sprayed so just using Rasolite as a base mate
Click to expand...

Nice...good option for quick waterproof coating not to heavy without the ball ache of hacking off...is Rasolate breathable?
 
theclemo said:
I think u can sponge finish it if I remember.
Click to expand...

I had the parex rep out on site the other day recommended parinter over good sound but cracked painted render and then acrylic paint or their thin coat but had to be something
 
I've never topped a render but lot of lads doing it at the mo...no way you can compete on price with hacking off so it's an option for me now
 
I haven't yet but this one is solid with really bad lines cut into it and makes a nice house look sh#t . Customers still recovering from the price a lime company gave them to hack it and state again.
 
duke163 said:
I haven't yet but this one is solid with really bad lines cut into it and makes a nice house look sh#t . Customers still recovering from the price a lime company gave them to hack it and state again.
Click to expand...

You really have to give the customers up front options/ballpark costs these days otherwise it's wasted time....most don't have a clue
 
This Arenino? I have a couple of bags to try. Is this a flat mineral render you sponge up? So a flat but coloured render?
 
Rigsby said:
This Arenino? I have a couple of bags to try. Is this a flat mineral render you sponge up? So a flat but coloured render?
Click to expand...
That's what I'm hoping John. One with a consistent colour would be a big seller. Not everyone likes the aggregate of thin coat and mono is mono.
 
My fear is with these flat coloured render is the bottom which goes off last full of water dries darker than the top which goes off quicker and dries faster so lighter.

Probably safer thinner.
 
Gotta say can't beat TPF sometimes, only wanted to get hold of a bag of this Adriano for a small job , had a message of @zolco (top man) he had two bags said I could have , he even drove to half way point today (over an hour drive) to meet up with them , thanks mate :birra: tpf
 
Well used my first bag of this Arenino today thought I'd post up , only a small job loads of tape lol tbh did like this gear would like to do on a bigger area instead of awkward little bit if I get right job come up, trowelled on nice to spread and sponged up nice

Arenino reviews?
Arenino reviews?
 
Last edited:
zolco said:
How long you waited to sponge it?
Click to expand...
Tbh I put a tight coat on and came back to sponge it about 20 minutes later it was firming slightly decided to give another tight coat didn't think I had it on thick enough then started sponging about 30 minutes after @theclemo told us not to much water on sponge at all , he was right (top man) , gave a very light sponge over again after that
 
Bauwer said:
Arenino sample sealed with Mono sealer, Vimasil Acqua, siloxane based:
Click to expand...

Should I seal these arenino jobs Alex and how much is the sealer please, sorry for all the questions I love the gear but get confused with all the new names , getting there though slowly but surely
Thanks
 
Vincey said:
Should I seal these arenino jobs Alex and how much is the sealer please, sorry for all the questions I love the gear but get confused with all the new names , getting there though slowly but surely
Thanks
Click to expand...
You should
 
Vincey said:
Should I seal these arenino jobs Alex and how much is the sealer please, sorry for all the questions I love the gear but get confused with all the new names , getting there though slowly but surely
Thanks
Click to expand...

Hi Mate, Arenino is hydrophobic in mass, so the sealer is optional same way as it is optional for Mono renders. Saying that it is a generally good practise to seal Mono renders but it is not typicaly done as it is expensive materials. Vimark sealers is competitively priced at £60 per 10L can which gives an output of about 60+ sqm, so about £1 per sqm. Vimarl sealer details:
https://www.vimark.com/en/prodotti/hydrophobic-primer-vimasil-acqua/

Available also from our partnets @Plasterers1StopShop with the next day delivery
 
Bauwer said:
Hi Mate, Arenino is hydrophobic in mass, so the sealer is optional same way as it is optional for Mono renders. Saying that it is a generally good practise to seal Mono renders but it is not typicaly done as it is expensive materials. Vimark sealers is competitively priced at £60 per 10L can which gives an output of about 60+ sqm, so about £1 per sqm. Vimarl sealer details:
https://www.vimark.com/en/prodotti/hydrophobic-primer-vimasil-acqua/

Available also from our partnets @Plasterers1StopShop with the next day delivery
Click to expand...
I'll seal it thanks again
 
Bauwer said:
Hi Mate, Arenino is hydrophobic in mass, so the sealer is optional same way as it is optional for Mono renders. Saying that it is a generally good practise to seal Mono renders but it is not typicaly done as it is expensive materials. Vimark sealers is competitively priced at £60 per 10L can which gives an output of about 60+ sqm, so about £1 per sqm. Vimarl sealer details:
https://www.vimark.com/en/prodotti/hydrophobic-primer-vimasil-acqua/

Available also from our partnets @Plasterers1StopShop with the next day delivery
Click to expand...
Just wanted to say thanks sealer going on really pleased with this arenino and customer over the moon too
Arenino reviews?
 
Hi guys,just asking here ,Iv been to see a job tonight it s looking like they are gonna go for arenino ,Iv not used the gear before but reading through reviews it good stuff . I presume a coat of bauwer light ruled off then apply arenino by trowel and sponge up am I right?
 
bopper said:
Hi guys,just asking here ,Iv been to see a job tonight it s looking like they are gonna go for arenino ,Iv not used the gear before but reading through reviews it good stuff . I presume a coat of bauwer light ruled off then apply arenino by trowel and sponge up am I right?
Click to expand...
Yes. But don't do the arenino same day as bauwer. Do it a few days later.
 
theclemo said:
Yes. But don't do the arenino same day as bauwer. Do it a few days later.
Click to expand...
Cheers Clemo ,think common sense prevails there regarding same day.but yer first time using it just wanted to confirm it, any tips buddy ?cheers vince bud.
 
@Vincey
The job above looks tidy. alex has put me on to a lead i will be visiting next week.

they want insulated so bauwer light. have you used this and what did you use before the arenino
 
You must log in or register to reply here.

Similar threads

A
Eco rend QR1 quartz render
Replies
2
Views
146
Monkey Boy
Monkey Boy
J
Render on victorian terrace
Replies
3
Views
171
Rossi46
Rossi46
L
l*m*-g***n natural finish issues?
Replies
2
Views
602
FreeD
FreeD
L
Nextdoor app, oneroof app, citizen...
Replies
2
Views
209
paulf
paulf
A
weberend one coat dash advice
Replies
2
Views
566
essexandy
essexandy
Back
Top