Olican
Private Member
Rendered a timber frame block of flats 5 years ago and one elevation has delaminated from the boards and shelled off.
All the work was carried out to spec, rest of the job is sound.
I'm in the clear on this one , the contractor is not looking to me for responsibility I'm just curious as to what could of caused it. Site meeting on Wednesday with Knauf, the render board supplier and a few other suits. I'll be keeping my mouth shut. Looks like it'll be an insurance claim.
Base coat up210 hand applied, fully meshed onto top 1/3rd of base coat. Materials mixed with clean tap sourced water. Sufficient curing time before toping with Knauf mamorit
All the work was carried out to spec, rest of the job is sound.
I'm in the clear on this one , the contractor is not looking to me for responsibility I'm just curious as to what could of caused it. Site meeting on Wednesday with Knauf, the render board supplier and a few other suits. I'll be keeping my mouth shut. Looks like it'll be an insurance claim.
Base coat up210 hand applied, fully meshed onto top 1/3rd of base coat. Materials mixed with clean tap sourced water. Sufficient curing time before toping with Knauf mamorit