Wood insulation board

[Had]

Hey.
I’ve got a load of bagged lime to price up.
I’ve used the solo l*m*-g***n good few times but on day rate
They’re looking for a m2 price just wondering what’s the avg about ? It 2coats with mesh round corners
Any help lads

 

[malc]

You will have very little competition on that work. So smack their arse!

 

[Salfordspread]

You will have very little competition on that work. So smack their arse!

Definitely

 

[Had]

You will have very little competition on that work. So smack their arse!

I was thinking somewhere around £30 m2 similar to mono ‍ I don’t want to under value it as I know most lime work it £££

 

[Stewie03]

I was thinking somewhere around £30 m2 similar to mono ‍ I don’t want to under value it as I know most lime work it £££

Double it

 

[Had]

Double it

I do like the sound of that
Is £60 about the avg would you say

 

[Salfordspread]

I do like the sound of that
Is £60 about the avg would you say

There be no big que to use that stuff . We used it a few years ago on a renovation project in Manchester it's fukin awful stuff

 

[themucky1]

I do like the sound of that
Is £60 about the avg would you say

Depends, what’s the background like? How thick’s it going on, why’s it need mesh?

 

[Had]

Depends, what’s the background like? How thick’s it going on, why’s it need mesh?

It’s just the system 10mm with mesh onto woodfiber inso board

 

[jamesthefirst]

Is it the one coat finish ( in 2 passes) or will you be finishing with 2-3mm lime skim coat?

 

[FreeD]

I was thinking somewhere around £30 m2 similar to mono ‍ I don’t want to under value it as I know most lime work it £££

Mate you wanna be getting in £100m2 for that...no one else will touch it.

 

[Had]

Is it the one coat finish ( in 2 passes) or will you be finishing with 2-3mm lime skim coat?

Yes one coat in 2 passes with mesh in first coat

 

[jamesthefirst]

Yes one coat in 2 passes with mesh in first coat

I struggled with it on my own two bedroom ceilings around 14m each, the wood wool boards seemed to have a bit of suction which i didnt control very well.