Venetian plaster sign board

Status
Not open for further replies.

Mike814

Member
I've just refurbished a restaurant/bistro for a client. It is a rustic style finish and after discussing venetian plaster with them they asked if it was possible to create a signboard for them.

 
I've just refurbished a restaurant/bistro for a client. It is a rustic style finish and after discussing venetian plaster with them they asked if it was possible to create a signboard for them.

:RpS_cool: nice work mate
 
Last edited:
Yes very good i especially like the way you have made the frame look so realistic :RpS_wink:
 
Nice 1 @Mike814 what did u use for the stencil lettering matey?

I layed on a coat of white carrara, then after drying time put low tack masking tape on the board where the lettering was going. I printed the letters out on card and cut them out and then drew round them on the masking tape. I then carefully cut round the letters with a scalpel and removed the outside of them. Then carried out a normal carrara process over the whole board and removed the tape whilst still wet. Bit of a long winded process but it seemed to work
 
Status
Not open for further replies.
Top