D
Deleted member 32554
Guest
Tight stairway to sort , own property so get to experiment
9" solid wall , painted brick exterior
A knackered lime coat interior
Only got 20+mm depth to play with when lime is removed
Thinking of backing 9.5 board with 6mm XPS up to impact areas and EPS above
Foam stuck
Considering coating board back with SBR then sticking the foam with. SBR/ PVA mix
Any comments
9" solid wall , painted brick exterior
A knackered lime coat interior
Only got 20+mm depth to play with when lime is removed
Thinking of backing 9.5 board with 6mm XPS up to impact areas and EPS above
Foam stuck
Considering coating board back with SBR then sticking the foam with. SBR/ PVA mix
Any comments