D
Deleted member 23452
Guest
For those that use a tower as opposed to scaffolding one elevation or a full house.
Get a tower and f**k hand railsView attachment 42015
I.ll worry bout that in spring lolGuna be a struggling top coating off that trying to keep a wet edge!
I.ll worry bout that in spring lol
Tower OK. Only trouble is getting the corner rhightGet a tower and f**k hand railsView attachment 42015
Never noticed that. Not my doing neither is the two panels that are half held on with mesh and baseTower OK. Only trouble is getting the corner rhight
This is exactly why we bought our first tower. Scaffold company quoted £900 to deck out three large (70m2+) ceilings, but would only do one at a time. £505 later and we were the proud owners of a really good quality double width tower, new from eBay. Shortly after we bought a second one. They have literally made us £1000's. I estimate how much scaffolding would cost and just add that in when working out our quotes. Just like adding on 50p a metre for using our diesel mixer.I've got a three lift ally tower..very handy indeed.
One lift on wheels is great for high ceilings.
like your style, looks like a dog agility test courseGet a tower and f**k hand railsView attachment 42015
scaffold police have been informed.Always use a tower for small bits and charge for it, got a steel one more stable 10 minutes to set up, saved me and made plenty of moneyView attachment 42039
Get a tower and f**k hand railsView attachment 42015
I was thinking the same thingMate please tell me you put a coat on run tooth comb trowel on bedded mesh in and then put a 2nd coat on????
That photo looks like your just putting mesh direct over insulation board and applying render on top????
well spotted Z, should the render police be informed?
give him a chance to explain but this looks serious?
Yeah I did. I did it like that so I could see to over lap meshMate please tell me you put a coat on run tooth comb trowel on bedded mesh in and then put a 2nd coat on????
That photo looks like your just putting mesh direct over insulation board and applying render on top????
Anyway I messaged you my bigger prob. Have a lookMate please tell me you put a coat on run tooth comb trowel on bedded mesh in and then put a 2nd coat on????
That photo looks like your just putting mesh direct over insulation board and applying render on top????
Yeah I did. I did it like that so I could see to over lap mesh
Yeah I did. I did it like that so I could see to over lap mesh
Anyway I messaged you my bigger prob. Have a look
Anyway I messaged you my bigger prob. Have a look
Put base on mesh second coat . It was still soaking so didn't bother scratchingSo which way did you do it????
Put base on mesh second coat . It was still soaking so didn't bother scratching
Get a tower and f**k hand railsView attachment 42015
WtfGet a tower and f**k hand railsView attachment 42015