Ritmo water setting

[Vincey]

what do you lot have water bar set at for Weber ocr, had a nightmare today even getting it through to test bucket, had it set at 220 is that to low ?
Thanks

 

[MikeAtthis]

No about 180 I think for use or a bit lower


Sent from my iPhone using Tapatalk

 

[MikeAtthis]

Did you have enough in the bottom to start with ?


Sent from my iPhone using Tapatalk

 

[Vincey]

Did you have enough in the bottom to start with ?


Sent from my iPhone using Tapatalk

Just above the orange on bottom of paddle

 

[Vincey]

I'll have another go in a bit see if 180 is better thanks mike

 

[stuart23]

If it's not going through at 220 it won't go through at 180. Don't know about tinto bit on mine I pump it through like piss then slowly thicken it up

 

[MikeAtthis]

Stuart right with water but tip the power in slowly you might of just push the water out if you dumped it in to fast


Sent from my iPhone using Tapatalk

 

[vfr12]

Make sure:
You start with full chamber first on slow speed, just to get the material out
Stop the machine and set the speed and water and trow half of a bag in

 

[Vincey]

Stuart right with water but tip the power in slowly you might of just push the water out if you dumped it in to fast


Sent from my iPhone using Tapatalk

Ffs call me the biggest stupid t**t of a plasterer , suppose it does help to turn the water on lol

 

[MikeAtthis]

Ffs call me the biggest stupid t**t of a plasterer , suppose it does help to turn the water on lol
View attachment 18765

That might be it [emoji23][emoji23][emoji23]


Sent from my iPhone using Tapatalk

 

[stuart23]

Ffs call me the biggest stupid t**t of a plasterer , suppose it does help to turn the water on lol
View attachment 18765

Aye your a fud lol

 

[vfr12]

To the left mate, that's off at the moment.Should be in the orange zone

 

[vfr12]

Thank god you didn't race @flynnyman

 

[Vincey]

Thank god you didn't race @flynnyman

Don't worry his time will come for sure, shut him up once and for all,

Thanks for the help by the way

 

[flynnyman]

Don't worry his time will come for sure, shut him up once and for all,

Thanks for the help by the way

That would never happen and never has lol your lucky I have let you off

 

[Vincey]

It's not how quick you get there that matters,
Your time will come, your time will come my friend

 

[MikeAtthis]

View attachment 18769

It's not how quick you get there that matters,
Your time will come, your time will come my friend

Human error
Easily done [emoji1303]


Sent from my iPhone using Tapatalk

 

[flynnyman]

View attachment 18769

It's not how quick you get there that matters,
Your time will come, your time will come my friend

I will come out of retirement to race you.

 

[Jim85]

You just made everyone who's ever had a stressful day with a machine feel much better! Thanks [emoji106][emoji106]


Sent from my iPhone using Tapatalk

 

[zolco]

To the left mate, that's off at the moment.Should be in the orange zone

He needs to get tango'd

 

[Vincey]

You just made everyone who's ever had a stressful day with a machine feel much better! Thanks [emoji106][emoji106]


Sent from my iPhone using Tapatalk

Pft can rest assured I won't be doing any videos for them even if I crack a 100m2 gable end I'll keep stum

 

[Arti]

Nice water hose