Quions:

[George Kidd]

 

[Jgreenplastering]

Looks mint mate.
What colour are they? Have they been left or matched to the cills?


Sent from my iPhone using Tapatalk

 

[plas1]

nice work mate!

 

[plastererpeter]

Nice job mate

 

[Rossi46]

Where is this George?

 

[paulf]

I do like stuff like that much more satisfying than skimming.

 

[beader]

That makes me moist.

 

[Danny]

looks pucker

 

[Dropsalot]

Niiiice!!

 

[Marshy]

Looks top drawer George

 

[theclemo]

In all fairness they are a easy as f**k to do. I was able to do them when I was 17




Am great

 

[vfr12]

In all fairness they are a easy as f**k to do. I was able to do them when I was 17




Am great

No doubt man! If you can manage to come up with avatar like this.....quions must be very boring

 

[Gibbo]

In all fairness they are a easy as f**k to do. I was able to do them when I was 17




Am great

Did you use battens though clemo

 

[theclemo]

Did you use battens though clemo

I did Gibbo. And a pointing trowel and a small brush. My dad and uncle show me the old way. And I still do it that way.

 

[Gibbo]

Battens are for amateurs

 

[theclemo]

Battens are for amateurs

Am saying just 2by1 running down the wall in each side of the corner. And holding a 3by1 on the corner to fill out to. Then cut the coins out.

 

[Gibbo]

Farrell and sons clemo

 

[theclemo]

Did you use battens though clemo

I read it worng u ment Battens every where then take them off when set f**k that.

 

[theclemo]

This is how I do them gibbo. But use a 2by1 going down the wall just to get the width and 20mm depth. U get less waste that way.

 

[Danny]

I never did them :-( I feel incomplete :-(

Sent from my SM-N910F using Tapatalk

 

[theclemo]

I never did them :-( I feel incomplete :-(

Sent from my SM-N910F using Tapatalk

Once you have the measurements it's not that hard. I often cut off the worng coin lol u what to see me going mental when that happens.

 

[Danny]

Once you have the measurements it's not that hard. I often cut off the worng coin lol u what to see me going mental when that happens.

Lol I can imagine

Sent from my SM-N910F using Tapatalk

 

[George Kidd]

Hi Rossi mate, it was a house that I plastered back home in NI mate, a few weeks before I came to Australia

 

[Jerseyboy]

This is how I do them gibbo. But use a 2by1 going down the wall just to get the width and 20mm depth. U get less waste that way.

Do you not finish your render off with a sponge.

 

[theclemo]

Do you not finish your render off with a sponge.

I do

 

[Jerseyboy]

I do

I just didn't see it on the video that's why I asked

 

[theclemo]

I just didn't see it on the video that's why I asked

That's not me in the video. It's the same way I cut them that's why I put the video up

 

[Jerseyboy]

That's not me in the video. It's the same way I cut them that's why I put the video up

Sorry mate
I think there a bit rough on the video
I wouldn't get away with them on the front of a house here.
I do mine the same