In all fairness they are a easy as f**k to do. I was able to do them when I was 17
Am great
Did you use battens though clemoIn all fairness they are a easy as f**k to do. I was able to do them when I was 17
Am great
I did Gibbo. And a pointing trowel and a small brush. My dad and uncle show me the old way. And I still do it that way.Did you use battens though clemo
Am saying just 2by1 running down the wall in each side of the corner. And holding a 3by1 on the corner to fill out to. Then cut the coins out.Battens are for amateurs
I read it worng u ment Battens every where then take them off when set f**k that.Did you use battens though clemo
I never did them :-( I feel incomplete :-(
Sent from my SM-N910F using Tapatalk
Lol I can imagineOnce you have the measurements it's not that hard. I often cut off the worng coin lol u what to see me going mental when that happens.
This is how I do them gibbo. But use a 2by1 going down the wall just to get the width and 20mm depth. U get less waste that way.
I doDo you not finish your render off with a sponge.
I just didn't see it on the video that's why I askedI do
That's not me in the video. It's the same way I cut them that's why I put the video upI just didn't see it on the video that's why I asked
Sorry mateThat's not me in the video. It's the same way I cut them that's why I put the video up