-
-
-
Depends if you know the difference between doing a bit of hand taping and doing proper tape and jointing with all the proper gear and...
-
I would avoid both like the plague
-
plas1 reacted to Cockney1's post in the thread PLASTERER WITH 20+ YEARS EXP LOOKING FOR WORK IN AND AROUND THE MIDLANDS with
Like.
Definitely desperate but who knows his current circumstances and what he’s been through? -
Just Shite. Quicker to redo than titivate it
-
I'm betting he wasn't expensive......... Nor a tradesman.
-
Don’t ya think it would be worth finding out how many metres before you ask/give any rates out?
-
Just the one.
-
If your rates were worth a toss you'd put them up here.
-
plas1 replied to the thread family fall outs.f**k*d her off
-
You can pick your friends but not your family.
-
You can turn an external angle freehand. Hold the trowel in the upright position turn the angle and finish off pulling a piece of...
-
plas1 reacted to KingCharlesTheTurd's post in the thread How would you plasterboard this steel beam? with Agree.
You’re obviously out of your depth pal, get a spread in
-
Tech sheet if anyone wants a read. Been using it for around 5 years. It's a 6mm coating not a 1.5. Can never beat a full ewi system...
-
Tell the client that because of all the problems with the work that the price you gave has gone out of the window. You are in a strong...
-
Chrispy foam!
-
The Conversation will sound a bit like this . Any reason you did not skim ceiling first.. Job will take longer longer know .
-
plas1 reacted to malc's post in the thread HELP! - plastering over slurry (mums kitchen) conflicting advice with Agree.
I don't like the areas that have been missed with the tanking, nor the bricks with pointing missing. I would correct those faults ...
-
Tiler will sort it mate
-
plas1 reacted to Monkey Boy's post in the thread A plasterer with over 20 yrs experience looking for a job or joint venture with Funny.
-
May be moving to gods country (wales) apparently that’s what they call it anyway :inocente: south wales Newport area or up to as far as...
-
-
plas1 replied to the thread Spray Cork.@BryantPlastering
-
Are you still dishing out free balloons Ryan?
-
plas1 replied to the thread Cheapest plaster for textured pattern.Now your just complicating things Jess
-
Sounds like the room will look like a sample board.
-
How many coats did he give it Chris? :rayos:
-
cost of the ladies toilets in the lake district for my 4 year boy to write his name FIN in his own s**t on the toilet wall 2 old...
-
plas1 reacted to essexandy's post in the thread New Concrete Floor – Prep Required for Engineered Wood & Wall Damp Proofing? with Funny.
I would imagine that any "tricky situation" will have been resolved long ago mate, the op was in 2019!!!
-
plas1 reacted to John j's post in the thread Anyone had their work scrutinized by this s**t yet with Funny.
Comes on all my jobs . He.s good lad
-
-
Loading…
-
Loading…