Hi all,
On Friday at college I started a module in which I had to use bonding plaster for the first time. It was 2 bond it coats/ 2 multi on (internal) painted brick wall surface.
I forgot to write notes as I did it and I'm now a bit confused about the scratch coat and PVA. I know its so the bonding or multi can stick to the surface but not sure where it fits in between layers.
Is this the method?
1. Apply neat PVA to internal brick wall surface
2. Measure and use spirit level to attach the beading (with temporary screws)
3. Dry mix the bonding
4. Apply Bottom coat
5. PVA
6. Apply scratch coat?
7. Multi finish under coat
8. Multi top coat
9. Wet trowel
Thanks in advance!
P.s be kind lads and ladies I've only been doing this 3 weeks! :RpS_crying:
On Friday at college I started a module in which I had to use bonding plaster for the first time. It was 2 bond it coats/ 2 multi on (internal) painted brick wall surface.
I forgot to write notes as I did it and I'm now a bit confused about the scratch coat and PVA. I know its so the bonding or multi can stick to the surface but not sure where it fits in between layers.
Is this the method?
1. Apply neat PVA to internal brick wall surface
2. Measure and use spirit level to attach the beading (with temporary screws)
3. Dry mix the bonding
4. Apply Bottom coat
5. PVA
6. Apply scratch coat?
7. Multi finish under coat
8. Multi top coat
9. Wet trowel
Thanks in advance!
P.s be kind lads and ladies I've only been doing this 3 weeks! :RpS_crying: