Good and bad ones, its often upto the site foreman to have it sequenced properly, most of us scare people out of our way anyway. I hate when the put door frames off plumb or don't align them when they are in a row.
a whack with the hammer sorts that problem (the packers not the joiner)The best one is when they think its acceptable to leave wedges sticking out a few inches on door frames!!! It's ok I will chop them back!!! W.ankers!
Or when they foam any openings around casings or windows and leave it all over the place. Cut it back you prick!
I often see double glazing frames warp by using too much foam. They need to know when it's to be used and when support is needed whilst it sets.
one of the fellas i do a bit for every now and then fills chases with the shite, hate it
...and I think we all feel the same.
The job I'm on now...it may well come to blows. Fcukin fed up of this shite.
what you got upto last night was weird behavior :RpS_biggrin::RpS_confused: That is weird behaviour
Have you 'windmilled' him yet marra? :RpS_thumbup:
Have seen that done before, a head shaker,another classic is the chippy jacking up the floor joists to level them but leaving the joist hangers down under Neath so you have to board around and bond the ceiling, stupid so fn stupidJob I'm on now is a laugh. Skimming a bedroom but the owner is pissed off with the ceiling which is sloping. Why is it sloping? Because the tw*ts that did the flat roof did not want to bother putting firring strips on top so they just put all the main joists in on the piss. Lol.
Now I'm having to do the opposite and screw firrings to the underside of them and board.