Horrible stuff

[Djr]

Got asked to sound coat the party walls on new builds in this gear
Fuk me it like floating with drywall

 

[lurpak]

Thought it was multi lol

 

[Dansouthcoast84]

just lay it on and leave it... we usually run a scratch come.over it

 

[JessThePlasterer]

Never used it before.... so do you float that on, leave it and then dryline with sound board?

 

[Vincey]

Looks good to me

 

[McPlaster]

I have earn't a few quid sondcoating! When it first came out , nice job to do if your an organised chap.

 

[John j]

Am i right in saying its a total waste of time or does it actually work

 

[Djr]

We used to do it in s/c years ago . They reckon it works

 

[Djr]

Never used it before.... so do you float that on, leave it and then dryline with sound board?

Yes we dab soundbloc on it when it sets

 

[John j]

We used to do it in s/c years ago . They reckon it works

Got some bungalows to do in s+c . Did some flats while roofs were off and it snowed dont ask. Did em agian as it all ended up on floor . Then all boards came loose as they had a fine dust on from stihl saw so had to drill holes and put loads of foam in . Crazy unorganised firm that paid well lol

 

[Djr]

Got some bungalows to do in s+c . Did some flats while roofs were off and it snowed dont ask. Did em agian as it all ended up on floor . Then all boards came loose as they had a fine dust on from stihl saw so had to drill holes and put loads of foam in . Crazy unorganised firm that paid well lol

Sounds like our site lol

 

[Rossi46]

Throw it on, speedskim and go and have a brew

 

[John j]

Throw it on, speedskim and go and have a brew

How you roll with speedi @Rossi46

 

[Rossi46]

How you roll with speedi @Rossi46

There’s not half hour goes by without a fresh brew

 

[John j]

There’s not half hour goes by without a fresh brew

Yeah puts me off a bit how much it makes it hang

 

[Dansouthcoast84]

Never used it before.... so do you float that on, leave it and then dryline with sound board?

lay on 8mm thick. doesnt have to be perfect... scratch comb then dryline

 

[Djr]

lay on 8mm thick. doesnt have to be perfect... scratch comb then dryline

It's been that long since we scratch combed anything don't know where the fuking things gone ??

 

[Topspread16]

Had to do party walls in some bungalow loft spaces on site years ago. Bad times, after we’d plastered the bungalows I was about 19 and got shafted with the lot of them.

 

[Djr]

Ha ha that's worse than cylinder cupboards or under the stairs

 

[Andy g]

Got asked to sound coat the party walls on new builds in this gear
Fuk me it like floating with drywall View attachment 26796View attachment 26796

More s**t of the bg shop floor