FASSA Ki7 Issues

[Render1234]

Hi,

Has anyone had issues with Fassa Ki7 and RX 561 Acrylic Topcoat debonding?

 

[Gurva]

Base coat fully cured?

 

[Render1234]

Yes, was applied for months before topcoat was applied

 

[Dansouthcoast84]

never had a problem before. or know of one.

as mentioned did you leave it to cure.

is the air dry and temp above 5 degrees when you topped and for some time after?


what have you been rendering?

 

[themucky1]

Hi,

Has anyone had issues with Fassa Ki7 and RX 561 Acrylic Topcoat debonding?

What have you applied the render o to and what prep work was done?

 

[Hhj]

Soft as butter crappy wanky stuff,
Seen and heard of loads of problems,
I've pulled mesh off walls in full sheets after 3 years

 

[FreeD]

Hi,

Has anyone had issues with Fassa Ki7 and RX 561 Acrylic Topcoat debonding?

No but I heard a rep mention that you shouldn't float it...or the surface will be powdery.

I've always power floated and topped with primer/silicone...never had a problem.

They are recommending spat only now.

 

[FreeD]

Renders are over complicated theses days...my longest lasting jobs are the good old Weber OCR with Cullamix Tyrolean...can be patched as well.