Hi guys how many of you are using the eze24 and how good is it?I'm mostly going to be using it for ewi and mono any help appreciated thanks
Hi Leeroy,
Thanks for the post mate. We have lots of guys out there using it for EWI jobs and also mono, if Im honest not many are on the forum as it is very PFT Based.
@Priceplastering and
@jasper use the EZE 24, Jasper uses it on a regular basis for EWI.
It is likely you will get recommend another machine on here as there are many dealers of the machine and many people who use it on here also. As you can see one has already jumped on the post :razz:
For EWI it is a fantastic machine and it is far quicker to set-up than any machine on the market. Knauf Insulation in the UK also rate this machine very highly. So highly they actually bought one off us even though they ha a look at the Ritmo from PFT.
With regards to EWI Systems, the main 'earner' of the system is your top coat and 85% of EWI receives a bucket coat finish. This section doesn't require a mixer anyway. We have customers currently spaying 500m2 + a day of 1.5mm Silicone Top Coat through the EZE 24 - this won't be an everyday thing obviously, you need the job for it. We even have guys who just spray 40m2 of the T/Cas it is so much easier and quicker to do then by hand.
With regards to needing more equipment. I think all who own a machine will agree this is all kept in the van anyway in case their machine goes wrong or the job doesn't suit machine application.
If you are looking for a machine which could mix as well, we can show you the M-tec M100, I am very confident after seeing the EZE 24 perform you will be amazed.
If you wish to talk to me in any more detail please do not hesitate to get in touch, I am on my mobile all day and can be reached on that. Will inbox you my number
Ryan