Exterior Rendering

gordon smith

New Member
I recently had rendering done by Sureserve its a disaster, they had to come back out and cut the rendering around the doors and windows as they hadn't put the correct insulation in, they then put a wool based material in and at night it looks like I have two doors and 2 windows, anyone help with this please
 
The company had put in the wrong materials in around the windows and doors so they came back to cut out the finished rendering and replace the materials with wool as it’s a safety issue they had to then start to render around the windows and doors again once the new materials were put in,it was fine before now it looks terrible
 

Attachments

  • Exterior Rendering
    IMG_1735.webp
    538.7 KB · Views: 0
  • Exterior Rendering
    IMG_1733.webp
    650.5 KB · Views: 0
  • Exterior Rendering
    IMG_1691.webp
    171.5 KB · Views: 0
  • Exterior Rendering
    IMG_1861.webp
    419.2 KB · Views: 0
  • Exterior Rendering
    IMG_1876.webp
    771.7 KB · Views: 0
  • Exterior Rendering
    IMG_1877.webp
    861.3 KB · Views: 0
The company had put in the wrong materials in around the windows and doors so they came back to cut out the finished rendering and replace the materials with wool as it’s a safety issue they had to then start to render around the windows and doors again once the new materials were put in,it was fine before now it looks terrible


Not great mate.


But what's even worse is the light source/location. Are they the permanent locations for the lights or just to show the work up?
 
This is my outside doorslight that shows the house issues at night, during the day you can still see some but the light definitely shows all the faults up
 
This is my outside doorslight that shows the house issues at night, during the day you can still see some but the light definitely shows all the faults up

Unfortunately even another coat of top won't cover that.

Needs re basing and layering it out.

Much more straightforward one would be to shift the light over a tad, so it's not casting a direct source across the wall.

Not a fix though obviously.
 
Back
Top