Ehi is there lightweight version of a scratch render, ie monorex.designed to go over a cement carrier board. It’s different in that it’s expanded perlite in the aggregate of it, a bit like carlite browning.Some of this Parex is overComplicated. Why so many materials for similar Jobs. Weber,K rend, Fassa, keep it simple.
only Parex do a lightweight mono ! It’s not over complicated base coat and top coatSome of this Parex is overComplicated. Why so many materials for similar Jobs. Weber,K rend, Fassa, keep it simple.
Wow! Thanks for that.only Parex do a lightweight mono ! It’s not over complicated base coat and top coat
Parinter, Parmurex, Monorex, EHI, parlumiere, maite, DPR, monogris. Headacheonly Parex do a lightweight mono ! It’s not over complicated base coat and top coat
They all have a range of products ? What’s your point ?Parinter, Parmurex, Monorex, EHI, parlumiere, maite, DPR, monogris. Headache
I find the Parex range a lot more complicated than all the other manufacturers.They all have a range of products ? What’s your point ?
Wow! Thanks for that.
Parinter, Parmurex, Monorex, EHI, parlumiere, maite, DPR, monogris. Headache
I find the Parex range a lot more compl
theirs no difference dude just use the product needed for the jobI find the Parex range a lot more complicated than all the other manufacturers.
Never had to clean the solenoid. Where is it?Sorted it now. Cleaned the solenoid as the spray before was ms20 with loads of waterproofer in. Looks like solenoid was sticking due to the waterproofer. Thanks all for your help. Everyday is a school day
only Parex do a lightweight mono ! It’s not over complicated base coat and top coat
Never had to clean the solenoid. Where is it?
Never had to clean the solenoid. Where is it?
Sorry Ryan didn’t knowPRB Make one as well - PRB Thermolook
Me neither, blones might clean ours when it gets serviced every year though.Never had to clean the solenoid. Where is it?
All the way to Blones when you’ve got Les so close?Me neither, blones might clean ours when it gets serviced every year though.
It’s who I bought it from originally, so I’ve stuck with him from the start. it’s only 40 quid on a pallet to send it there. It would cost me that in fuel,Rotherham’s a long way south from me hour and half ish,then back.All the way to Blones when you’ve got Les so close?