if u thought yesterday sounded like a ballache, today was shocking.
thought id go back and give it another go as i didnt have anything else to go to today.
bought some new beads and stuck the rest up. got machine out ready to go and the water pump had seized. havent used it for a couple of months. so after getting angry with that, dropped a couple of bags in and started to spray. after about 5m, the hose goes pop and the cap goes flying as a lump of s**t blocked it. this happened 5 times in the next half hour or so. was pretty fuming by this point and had me mate seiving it through before dropping them in. there was literally 5-10 lumps in each bag, whether from the top bottom or middle of the pallet. so after about 20 bags decided to call it a day. called cpi and theyve agreed to take the s**t bags, redeliver what i ordered and sort me out on the next delivery which i thought was quite good.
anyway, started to clean machine and it starts to hammer down. for some reason this then trips the power, and coz the **** woul;dnt let me have a key i cant get in to switch the box back on. so wash out by hand in the rain, start putting the gear away. by this point im dripping and need to pull down the tower were using. so, with me about 6-8 ft in the ait, with only 1 platform, 2 horizontals and 1 diaganal still left on,. me mate decides to pull off the diagonal, which in turn made the scaffold fold in half with me on it. fortuantly it hit the pallet of gear so didnt completly fold. i fell off tho so had to restrain myself from putting my fist through his head. so once weve loaded it all into the fella garage, and the machine and all the kit, press the buzzer to shut the garage and coz the powers tripped it wont shut. the override just kept making funny noises, so off we go loading the van back up and carrying the scaffold round the back. finished at 6. got 20 bags on the wall and a bit of beading,. cracking day