Recent content by liverpool_plasterer

Where would you put the foil mate foil on brick then kingspan then stud then board?

Thanks for your reply mate Yes i was thinking on external insulation just didnt know weather it would be as good as kingspan and stud on the inside Hmm what you think?

Thanks for your reply mate you suggest kingspan inbetween the stud or behind the stud work that way the hole wall would be covered with kingspan Also reckon i dhould keep the vent or do away with it Thanks again Pee

hello lads hope your all well Got a single brick outbuilding on the back of a kitchen Its freezing out there and the walls are soaking wet and full of black spot mold What you think the best way to solve and damp and condensation problems in the future? there is already an air vent shal i...

Thanks for your reply lads sbrd and went again bit awkward trying to get up to the 10mm beads in one coat but rubbed up well and looks perfect now

What a job! What was your mix ratio mate

I think il re bead and go again when I get a few spare days Would it work if I sbr and re k rend? Anything better you can recommend?

I will try and get some pics up some how I'm certain the dry edges have caused this thanks for your help fellas I was mixing bucket at a time by myself setting it up on the board and throwing on I should have mixed 3 or 4 up and got it all on together.. Live and learn

Thanks for your help mate it's pis£ed me off so gonna give it another go. I read up on the scratching but my fuc:£ing window cleaner came past said he laybours on plasterers and said wait until tomorrow so I was up at 7 am it took me 2 house to scratch about 4metres it was solid my hand was...

Haha yes church I've phoned a couple of local plasterers and put a post on here asking if I can jump on anyone's k rend jobs with no wages for a bit of experience didn't get any luck so my garage has paid the price! Thanks for your reply too church you've helped me out before! You know your stuff

Yes mate that's exactly where it is, it's as ive done a section stopped to get more gear then started again the egde of the first section is where it looks shi&£ and won't rub up How do I prevent this It only took me 40 mins max to get on

I'd be over on the cill too if I gave another coat Does anyone know where I'd gets one sort of PVC cill extensions

You think it's dried to fast on the base coat I didn't damp it down before ?

Cheers for your reply mate yeh a mate of mine done his bay on his house and pretty much scratched his straight away and under certain light you can see these same smoothe lines like bald patches if you like You think these are hollows? Would sbr with grit in do the trick?

Hi lads hope your all well and working hard. Finally had my first go of k rend on my garage last week, scratched with base coat and mesh derbeyd and topped with k rend and derbeyd that too. gave it a day then scratched back overall it looks well...90% however there are a few smooth lines and...