Recent content by Jbeesy718

  1. Jbeesy718

    Insulating Victorian walls

    Think the previous owners have used this upstairs in the master bed when I stripped the paper it looked like orange peel. Thought it was an oil based paint like zinsser so I ran over it with a drywall sander Thinking the paint might not take properly‍♂️
  2. Jbeesy718

    Insulating Victorian walls

    Straight back to the brick or leave a cavity?
  3. Jbeesy718

    Insulating Victorian walls

    Did you do this on your own house? Or know if it’s resolved the issue? Just a little concerned moisture could form between the pir and brick wall, run down and cause damp at floor level.
  4. Jbeesy718

    Insulating Victorian walls

    Thanks going to look into iwi. House isn’t massive but could lose 70mm either side of it helped with efficiency of the house and reduce the possibility of condensation. Just be worried about moisture between the pir and brick wall as there won’t be any ventilation.
  5. Jbeesy718

    Insulating Victorian walls

    Seen these paints another brand claiming to do the same. Have you experience with the paint or just a recommendation? Seems to good to be true to me?‍♂️
  6. Jbeesy718

    Insulating Victorian walls

    Hi after a bit of advise I want to try and insulate the downstairs external walls of my Victorian house it has solid wall construction brick exterior which we get a bit of condensation on in the winter months not a lot just the odd bit behind a side board and storage box. I’m thinking maybe...
  7. Jbeesy718

    Not seen this before

    Called pegboard usually has a thin laminate on one side.
  8. Jbeesy718

    Stabila level recalibration

    Just ordered me a set of these can’t wa for them to arrive
  9. Jbeesy718

    Rendering over pebbledash garage

    Aye they were replaced them
  10. Jbeesy718

    Rendering over pebbledash garage

    Iv only done one my own. jet washed It down, sbr, Full meshed the scratch and doubled up on the joints then top coated s&c
  11. Jbeesy718

    Tile to Wall transtion

    Can't you just put a flat (L shaped) tile trim on then board with 6mm board and skim you'll get a nice clean line between different finishes.
  12. Jbeesy718

    tiles

    Just blue grit it and skim next day done loads for a office fit out company no come backs yet and these toilets get abused everyday by desk monkeys. No offence @Danny. Just make sure all the tiles are sound n not loose.
  13. Jbeesy718

    Mixing Sheet

    A couple of sheets of Corex is good.
  14. Jbeesy718

    Does this seem like a right mission

    Yep brick hammer for me good as new
  15. Jbeesy718

    TPF Mug key ring and extra time

    Just got home to a delivery of the above. Thanks Danny love a freebie
Top