Recent content by DaveAndersonREP

you may also need to tighten the rotor and stator did you check the pressure?

The pressure gauge attached to the outlet where the material comes out.

That very low on the water we tested webber chalk last week through the M200 and found the water needed to be at 320 on speed 4 the reason its not spraying correctly is that the water is set to low. Take the pipe off the machine and reset the water to 320 then refit hose and adjust the air pipe...

Try adjusting the air pipe in the spray gun a couple of mm and also raise the water very slightly, what water setting and speed setting are you using.

Hi matt I am the rep for Plasterers 1 stop shop please give me a call on07773 286659 so we can have a chat to see what machines best suited to your requirements Regards Dave

Hi Ellis you can't spray finish with your current setup the gun is the wrong one also the hoses are to larger diameter also you need a different rotor and stator and bottom bracket Sent from my iPhone using Tapatalk

Nothing wrong with a good night shift Sent from my iPhone using Tapatalk

Ellis call me any time for help with your M200 Sent from my iPhone using Tapatalk

Hi there just a couple of questions what material are you using and how many meters of hose and finally what machine is it? Then i may have some idea of why you have no pressure showing

Hi Clivo we at Plasterers 1 Stop Shop are able to supply Mapei they run courses every couple of months at their head office in Halesowen, if you would more info please call me on 07773 286659. Regards Dave Anderson Sent from my iPhone using Tapatalk

loads of room round that furniture for you to worlk ;)

Thanks Dan I could do a demo on the Eze 24 towards the end of next week Thursday or Friday let me know if that would work for you Cheers Dave

It has now been 12 months since I joined the team at PFT Central / Plasterers 1 Stop Shop, time has gone so fast it doesn't seem like a few weeks ago that I was driving down to Cheltenham to collect my van and spend time with Andrew Hill and Ryan Hill getting up to speed on the latest machines...

I would speak with someone like Tom Hill at Sto they always did keep records but unsure if they still do so as things have changed since I was there Sent from my iPhone using Tapatalk

The product is stolit probably k1.5 other manufacturers do similar products it is a silicon based material Sent from my iPhone using Tapatalk