Search results

you may also need to tighten the rotor and stator did you check the pressure?

The pressure gauge attached to the outlet where the material comes out.

That very low on the water we tested webber chalk last week through the M200 and found the water needed to be at 320 on speed 4 the reason its not spraying correctly is that the water is set to low. Take the pipe off the machine and reset the water to 320 then refit hose and adjust the air pipe...

Try adjusting the air pipe in the spray gun a couple of mm and also raise the water very slightly, what water setting and speed setting are you using.

Hi matt I am the rep for Plasterers 1 stop shop please give me a call on07773 286659 so we can have a chat to see what machines best suited to your requirements Regards Dave

Hi Ellis you can't spray finish with your current setup the gun is the wrong one also the hoses are to larger diameter also you need a different rotor and stator and bottom bracket Sent from my iPhone using Tapatalk

Nothing wrong with a good night shift Sent from my iPhone using Tapatalk

Ellis call me any time for help with your M200 Sent from my iPhone using Tapatalk

Hi there just a couple of questions what material are you using and how many meters of hose and finally what machine is it? Then i may have some idea of why you have no pressure showing

Hi Clivo we at Plasterers 1 Stop Shop are able to supply Mapei they run courses every couple of months at their head office in Halesowen, if you would more info please call me on 07773 286659. Regards Dave Anderson Sent from my iPhone using Tapatalk

loads of room round that furniture for you to worlk ;)

Thanks Dan I could do a demo on the Eze 24 towards the end of next week Thursday or Friday let me know if that would work for you Cheers Dave

It has now been 12 months since I joined the team at PFT Central / Plasterers 1 Stop Shop, time has gone so fast it doesn't seem like a few weeks ago that I was driving down to Cheltenham to collect my van and spend time with Andrew Hill and Ryan Hill getting up to speed on the latest machines...

I would speak with someone like Tom Hill at Sto they always did keep records but unsure if they still do so as things have changed since I was there Sent from my iPhone using Tapatalk

The product is stolit probably k1.5 other manufacturers do similar products it is a silicon based material Sent from my iPhone using Tapatalk

Hi there a new Eze 24 package costs £4217.99 +VAT if you would like any info please call me on 07773 286659 Regards Dave

No problem Gary Sent from my iPhone using Tapatalk

Mike we use our own Eze compressor with our Eze 24 and the M100, I know that the setup on the ritmo is different from our machines as we don't use our own spray gun Sent from my iPhone using Tapatalk

Also the volume as well though Sent from my iPhone using Tapatalk

Yes rigsby with the correct spray nozzle Sent from my iPhone using Tapatalk

Yes Gary not problem my mobile number is 07773 286659 Sent from my iPhone using Tapatalk

[emoji1417] Sent from my iPhone using Tapatalk

Ok you will need a 4 mm the nozzle size should be 3 X the material grain size 2 mm grain =6mm nozzle 1.5 = 4 mm as we don't do a 4.5 Sent from my iPhone using Tapatalk

It's a different gun on the m100 to the ritmo Sent from my iPhone using Tapatalk

Hi Gary what gun do you have on it is the cap a rubber one Sent from my iPhone using Tapatalk

I am the rep for plasterers 1 stop Sent from my iPhone using Tapatalk

Where is that from @stuart23 Sent from my iPhone using Tapatalk

That's not a problem 60 to 80 mtrs is easily achievable with the right machine Sent from my iPhone using Tapatalk

Hi bigali if you call me tomorrow on 07773286659 I will go over the machines with you as a machine will always be faster than hand applied Sent from my iPhone using Tapatalk

Pete call me in morning I sort it for you Sent from my iPhone using Tapatalk

I have seen this picture somewhere before @theplasterman :-)

Hi welcome on to the forum if you want any information about tools or machines please drop me a message Dave

True there Kieth you would struggle to keep that up all day Sent from my iPhone using Tapatalk

That looks out of control would like to see a more in depth video /demo to see the full set up Sent from my iPhone using Tapatalk

No problem I would always say do your homework and look at each machine carefully and speak with other machine guys on here aswell Sent from my iPhone using Tapatalk

Hi Jim85 as said above really I not seen them working but spraying finish requires a very precise set up and you would want good training aswell if you would like info on the M-Tec M100 or the Eze machine please give me a call on 07773286659 Sent from my iPhone using Tapatalk

Hi Shauny I can understand your reluctance to commit to a new machine as it is a large out lay, but in saying that you have then got a good machine and generator to start with with no bad history or abuse. If you would like any information on what deals I can offer on a new machine please give...

Plastering machine carys lol Sent from my iPhone using Tapatalk

No problem if I hear of any I will let you know eBay normally the best place to look. Just to let you know our K4 is basically the same as the G4 and is European manufactured the top motor and other parts are exactly the same. Sent from my iPhone using Tapatalk

Hi Shauny I can do you a good deal on a new Eze K4 Sent from my iPhone using Tapatalk

Hi Demon silicone spray is used to lubricant the rotor and stator when you first put them together other use is to spray it on your machine to stop anything sticking to it hope this helps Sent from my iPhone using Tapatalk

I know the guy in the video very well he never runs the machine full speed normally speed 5 or 6, if they are doing larger jobs he has an M-tec M300 to use

Hi @CraigFife the Eze24 will not spray sand & cement but Sto level coat will go through it no problem will be a lot easier and faster than hand applying

Hi there welcome on board @bodica996

The profile looks good Mac hopefully it will bring further work to you and having seen some of the work you turn out its all ways first class and professionally carried out.

your labourer can always clean my van I don't mind :-)

Hi Kenny the mono mix is a good machine it will mix most renders and also bg hardwall if need more info please drop me a line or give me a call on. Monday on 07773 286659

Hi Craig I am the sales rep for Plasterers 1 Stop Shop, we have a range of new diesel machines at very competitive prices if you would like any more information please give me a call on 07773 286659. Regards Dave

Hi Antah As already has been said the 3 machines that you are looking at are all very reliable and excellent quality machines that provide great value for money. As well as choosing the right machine the training and support package you receive by buying a machine from a reputable company will...

It certainly looks to have the mesh pinned to it :bananas: