Topspread16
Latest activity Postings About
-
-
Topspread16 replied to the thread Hello everyone, any tips on plastering/skimming around windows?.If reveals are solid, stick a 9.5mm board or even 6mm if they stock them near you over the top and bead then feather in on the face or... -
Topspread16 replied to the thread Rendering finish.
-
Topspread16 replied to the thread Rendering finish.Alpine finish
-
Topspread16 replied to the thread Dewalt 1600w mixer.Mine have all been like that, they wore thin before it snapped though.
-
Topspread16 replied to the thread Dewalt 1600w mixer.The 240v one is about 5 year old. On to its second paddle after wearing the first one to nothing till it split. Nothing else has been...
-
Topspread16 replied to the thread Dewalt 1600w mixer.Yes just run them till there’s nothing left in the batteries before charging. The first whisk I bought when they come out is definitely...
-
Topspread16 replied to the thread Dewalt 1600w mixer.It mixes no problem, you would probably need 3 batteries or 2 12amp ones. Mine come with 2 9amp I fit a taller paddle on one of mine...
-
Topspread16 replied to the thread Dewalt 1600w mixer.I’ve 2 battery ones, I only use them for skim. Kills the battery for anything else.
-
Topspread16 replied to the thread Dewalt 1600w mixer.Get one, only whisks I use now. I used to pay to have the megas repaired for what these cost. Only downside is you have to keep your...
-
Topspread16 replied to the thread Snagging.2 metres away in a well lit room isn’t it.
-
Topspread16 replied to the thread Need a little advice.Where are you based? Never know someone local may pop in and give you some pointers.
-
Topspread16 replied to the thread Skimming bullnose corners.More like a boxers nose chrispy?
-
Topspread16 replied to the thread Black dark shadow levels.What’ve you bought from vanstyle?
-
Topspread16 replied to the thread Flat roof leaks.It can’t be that, it only leaks when it rains.
-
Topspread16 replied to the thread Outdoor tool box.A van?
-
Topspread16 replied to the thread One coat or two?.T shirt and shorts, sometimes I’ll pull my socks up if it gets to minus 10. Tough up north
-
Topspread16 replied to the thread Trouble with rotor blocking..Are you tipping the gear into the bottom to stiff? The worm struggles to send it sometimes. Have you tried tightening or loosening the...
-
-
Loading…
-
Loading…