Wrinkled finish?
- Thread starter Brimstone
- Start date
MakeItSmooth
Well-Known Member
Poor sealing of the substrate, leading to uneven drying?
Or are you saying you reckon the actual surface of the plaster is wrinkled?
Or are you saying you reckon the actual surface of the plaster is wrinkled?
Lol...have you never worked on a site before????
They start fitting as were sweeping up!!!
@algeeman
algeeman
It’s A Boy
John j
Mono Don
Saw them pics . Did they paint it wetplot I've started tuesday
there moving in 3 weeks
algeeman
It’s A Boy
I wasnt here mate was skimming show home for another firm
usually paint them next day roll or spray.
John j
Mono Don
Ever known em to have problems
algeeman
It’s A Boy
never
only when its peeled off when strong wind blowing on paint when paint is wet.
or when block of apartments has fell behind and been told to crack on board/paster....when roof hasn't been finished
floors and floors of painted apartments with rain running through them.
mould all over the place
John j
Mono Don
Did similar . Rendered all parti walls. No roof on. Snowed like f**k .never
only when its peeled off when strong wind blowing on paint when paint is wet.
or when block of apartments has fell behind and been told to crack on board/paster....when roof hasn't been finished
floors and floors of painted apartments with rain running through them.
mould all over the place
That was a shite job. Had to screw loads of holes in some boards that had not stuck and squirt a load of foam in . Joiner said kitchens are holding some of them walls on
algeeman
It’s A Boy
John j
Mono Don
Same job he said have a done any webber . I said no. The builder got it up kn youtube . Said its 4 floors up crack on . Hear their in a lot of trouble so hopefully it all comes back on em . Working for a kid last week they owe 12 grand
tapit
Well-Known Member
Me too paint while wet
Djr
Well-Known Member
That's rough as arseholes
MakeItSmooth
Well-Known Member
What the actual Fk?!?!?
You genuinely have my sympathy, having to work on top of that $h1t boarding job.
...zombie mix for first coat, or just usual skim?
Stevieo
Royal Spin Doctor
f**k off GOGGLEBUM
Cockney1
Well-Known Member
How’s the dog?
algeeman
It’s A Boy
algeeman
It’s A Boy
John j
Mono Don
Haha i was gonna comment but think i.ll just tag fatha inalgee coat
John j
Mono Don
John j
Mono Don
Ffs aint ye gave that dog back you nicked last night yet
algeeman
It’s A Boy
I make his eyes bleed lol
John j
Mono Don
Bet he hets angry like that dwarf of lotr.s and starts swinging his big (but normal size to everyone else) axe round lol
Stevieo
Royal Spin Doctor
I'd give him back to an owner in an instant if they could show me that he was Thiers and he won't end up a pikey bait dog.
But he's been 'dropped off'
So it looks like he'll be around for a while.
44 now. One Gundog and one jack Russell and that'll be me I'd say
John j
Mono Don
Think you got both in one there
Stevieo
Royal Spin Doctor
Dunno.
He's some spaniel looking beast but the way he acts is a an out of the box Gundog. He was born to do it. He carries stuff around all the time and Ball Is Power.
I need to figure him out.
John j
Mono Don
I got two spaniels one cocker who plods on when were out . Proper retriever as his gums dont allow him to bite owt. Others more springer . Runs his sen stupid springing everything out in a 2 miles radious
The Hobo
Well-Known Member
remember my misses being like that
Ritch
Well-Known Member
I feel sorry for that dog having to live in your crack den