Shabba_don
Member
I have got a job to do next week which once they stripped the wall paper off uncovered a old serving hatch thats got a sheet of ply filling it in. I have got to skim the whole wall which is 25sq so the customer doesn't want to go down the board root. I did try and remove it but who ever done the kitchen years ago screwed there board to the other side and it put some hairline cracks in the plaster that side. Ideally I would normally remove it completely patch the kitchen up and board the living room wall but they have just had a brand new kitchen fitted and they have told me its a no go. Any ideas on how to skim over it? I did think scrim joints scatch for a key and a tight coat of either bonding or drywall. as its already flush with the existing wall if I mesh it its will bulge out. Any advice welcome. Cheers.