Morning chaps
Feel free to tear me a new ar*ehole...
Attempting my first bit of rendering this week. Will probably be an absolute disaster but god loves a trier.
The most ridiculous question I have is the dilution ratio of the additive.
Using Everbuild Integral Waterproofer, the manufacturer says:
In all cases, add to gauging water at an addition rate of
0.5 to 1 litre per 100 kg cement, or alternatively, one
part EVERBUILD® 202 Integral Liquid Waterproofer to
20 to 40 parts water and mix until fully dispersed, then
add to mix. Gauge the mix as stiff as possible to min-
imise risk of cracking
Am I along the lines, that to achieve this gauge, I'll put a cup (350-400ml) of overbuild per 12L bucket of water?
Feel free to tear me a new ar*ehole...
Attempting my first bit of rendering this week. Will probably be an absolute disaster but god loves a trier.
The most ridiculous question I have is the dilution ratio of the additive.
Using Everbuild Integral Waterproofer, the manufacturer says:
In all cases, add to gauging water at an addition rate of
0.5 to 1 litre per 100 kg cement, or alternatively, one
part EVERBUILD® 202 Integral Liquid Waterproofer to
20 to 40 parts water and mix until fully dispersed, then
add to mix. Gauge the mix as stiff as possible to min-
imise risk of cracking
Am I along the lines, that to achieve this gauge, I'll put a cup (350-400ml) of overbuild per 12L bucket of water?