training

[scottcurtis484]

ayup does anybody know where or who could give machine training near manchester . pft nothern booked for 5weeks .

 

[scottcurtis484]

also its a k4 i can start it spray it and stop it clean it and understand to a extent just need pointers on filters and wat the valves are as im ot clued on all that . all help appreciated u guys are a good lot .

 

[Dansouthcoast84]

@Plasterers1StopShop

 

[scottcurtis484]

i drove down that way at weekend and was 9 hour round trip with all road works and things along the way i was looking for some where up north ... if all fails il have to drive again

 

[Plasterers1StopShop]

i drove down that way at weekend and was 9 hour round trip with all road works and things along the way i was looking for some where up north ... if all fails il have to drive again

Hi Scott,

The K4 is our machine under the EZE brand. Visiting us will be your best bet. Give me a call tomorrow on 07891460532 and I can get you booked in

 

[Plasterers1StopShop]

@Plasterers1StopShop

Thank you

 

[scottcurtis484]

ayup mate.. just wanted to ask about the diff r+s i.e the one with tongues and claplable ones . at the moment im using one with a tongue and seems to be in a metal casing. the lads i got machine off got that 1 from p1. after the bits u pointed out to me in previous chats i have had the machine running lovely no hicups and seems to be very simple to use . just now gunna be replacing r+s and would appriciate some info so i can order

 

[Plasterers1StopShop]

ayup mate.. just wanted to ask about the diff r+s i.e the one with tongues and claplable ones . at the moment im using one with a tongue and seems to be in a metal casing. the lads i got machine off got that 1 from p1. after the bits u pointed out to me in previous chats i have had the machine running lovely no hicups and seems to be very simple to use . just now gunna be replacing r+s and would appriciate some info so i can order

Just go for our standard D,6-3 P1 and you won’t go wrong mate

 

[husnain11221]

ayup does anybody know where or who could give machine training near manchester . pft nothern booked for 5weeks . beach buggy racing hack apk

Hi! You might want to check out local community colleges or training centers around Manchester. Some private training providers also offer machine training courses. Alternatively, try reaching out to LinkedIn groups or local forums related to machinery for recommendations. Good luck!