Plasterface
New Member
Anyone got any good tips for getting finish too go quickly for small jobs and patching. Really annoying when you only got a bit too do and it just won't go off . Be interesting too see your different methods cheers.
Not always that easy if no dirty water . Unless you carry some around in an empty PVA tub as I do . Sad I know but does work .Mix it with dirty water
Tried that didn't really seem too work that well . But could just be me?cement or dirty water or a old opened bag of skim
A bag of sugar also works, but be careful as too little will re***d it, so make sure you whack the whole bag in :RpS_thumbup:
handfull or so of moulding plaster will do the trick
herds will be spreading it on toast now:RpS_drool:A bag of sugar also works, but be careful as too little will re***d it, so make sure you whack the whole bag in :RpS_thumbup:
handfull or so of moulding plaster will do the trick
note the or so parta handful into a bucket wouldnt make any difference
note the or so part
ok then 5 handfulls wouldnt make any difference
Yes it would try it
Why hasnt the forum clock been put back yet?
you can make up a bucket of what we used to call solid dope , first put about 2 l water in abucket add skim, wait until it starts to go off a bit , add more water, approx half a liter, wait until this starts to go of , keep repeating process until the mixture stops setting/going offyou should now have a full bucket or more of a mixture that looks like a bucket of skim , but it will not set, but if you add a small ammount to a new bucket of skim it will make it set much faster , if i recall about a small cup full of solid dope to a bucket will set bucket full of fresh skim in a approx in 1 hour . you will have to experment a bir , but it will work very well, and as long as you place a peice of cling film over the solid dope it will stay fresh for a long long time
:RpS_lol:If you ever make a sloppy mix and have no more dust, don't be tempted to add dry-lining adhesive to make it up :RpS_crying: