Stapler

[carlos]

The time has come to get a stapler. I have bit of a run of board work. Never had 1 before and wondered what every one used.

Are these any good http://m.screwfix.com/p/stanley-heavy-duty-staple-gun/62930 ?

 

[SpankySouthport]

Yes but get the model above that will fire tacks in as well [emoji106]

Flys through beads

 

[Garethharrison80]

Yes but get the model above that will fire tacks in as well [emoji106]

Flys through beads

Is the one above that the sharpshooter one (black)?

 

[Danny]

I used one from wickes it use torip through beads

Or do as someone told me the other week... use sellotape :-/

 

[SpankySouthport]

Is the one above that the sharpshooter one (black)?

Yes mines black although I don't think it colour specific...

http://m.screwfix.com/pr-gallery.htm?id=53860#imggal1

 

[jeanclaudevangyproc]

Wickes ones good I got one you can turn its power up and down good if someone try's not to pay you mine held a plumber

 

[carlos]

What's the best staples to use? 8mm? 10mm?

 

[zolco]

I had the tacwise for years bang on, recently changed to dewalt which is a pile of winniethepooh

 

[SpankySouthport]

What's the best staples to use? 8mm? 10mm?

10s get sharpshooter ones though I hate all the others!! The others tend to pop out because they have a sharpened tip whereas the sharpshooters are bunt but hold well..

eBay really cheap for them [emoji106]

 

[beddy]

That's the one ive got carlos it's fine. Tool station for staples. Pack of 5000 for a couple of quid

 

[carlos]

Cheers for the help fellas

 

[kgreigh]

That stanly one is the one I have. It's pretty good to be fair.

 

[DannyMac]

The t50 is the best I have found.

http://www.amazon.co.uk/Arrow-T50p-...qid=1434403707&sr=1-4&keywords=t50+staple+gun

 

[jeanclaudevangyproc]

Wickes own

 

[Arti]

just get hook on beads...........................

 

[Ashley milson]

I'd go with arrow it has teeth marks that's the width of a staple so when your teeth sink through the serrated bead you know it will fire correctly. I've got a Stanley stapler no help wat so ever no power to go through bead or no teeth/ guides. To help fire through bead

 

[beddy]

Why do you need to go through the bead?

 

[Garethharrison80]

Yes mines black although I don't think it colour specific...

http://m.screwfix.com/pr-gallery.htm?id=53860#imggal1

Yep thats the one, defo good quality.

 

[Ashley milson]

Why do you need to go through the bead?

It doesn't have a guides so you can't line it up. So if your firing blind. At least have power to penetrate through it. As you might as well use clout nails as you don't save any time with the stapler

 

[beddy]

I find you get used to how it works and dont really need to see

 

[kgreigh]

Yea the Stanley one I line the centre line up to a couple of different points of the bead depending on where I want to staple it.

 

[Ashley milson]

I like the arrow as I don't have to look. so if I'm going the top or bottom of bead where I can't see or can't be assed to look. I just rub a round n when the teeth sit in the hole of the bead I just simply staple.

 

[carlos]

Used the yellow Stanley 1 today with 10mm sharpshooter staples.

Works a treat, bangs through the bead if you don't get it quite right.

Thanks again for the advise.

 

[kemp]

i used to use a stapler i broke it oneday garbed some spry adhesive of carpet fitter never used one since