Soundproofing

[SpankySouthport]

I know wrong section but MF section dead

Will be doing a party wall that needs soundproofing, clients done his research and can't up with a few solutions, problem is a lot of them is just a waste of time..

We have 3 different depths to work to due to stairwells etc.

A 20mm system entrance hallway so not habitable no massive issue I explained to him but he's insitant that he wants something. (Tecsound and he reckons that I will be able to dab soundblock to it, I'm not so sure)


50mm system for the H/S/L any ideas?

Finally an 80mm system probably stud, resilient bars insulation, 2 skins of soundblock.

Cheers gents

@barred

 

[MikeAtthis]

On the 50 mm bit use a narrower stud staggered from side too side you can get spacers for them


Sent from my iPhone using Tapatalk

 

[SpankySouthport]

Hi Mike, how do you mean stagger the stud?

What spec would you say for the 50mm?

Cheers

 

[MikeAtthis]

ive it with 70 tract and 50 stud
you have a stud every 300 but at 600 centers either side of the wall
so one side of the wall you start of with a 300 rip of board

 

[Vincey]

Near enough 100 % sure the dabbing is definitely not a goer..tbh 20mm system is pretty rubbish any chance that could be at least 50mm and could you talk him into ceiling's having system install as well as most of sound would flank the wall

 

[MikeAtthis]

encon sells the clips


Sent from my iPhone using Tapatalk

 

[Fatarm]

I was on a job a while back and the customer was discussing soundproofing the walls with the joiner on the job... as she could hear next door standing up and sitting down lol.
Also could hear them breathing at night..


I thought good luck to you Mr joiner

 

[stuart23]

Is the dirty deviant trying to get a wank on the fly without the wife hearing?