Skimming external curve

Cornelius

Cornelius

Well-Known Member
Skimming external curve
skimming over quite a sharp curve, was just wondering what the best ways to approach it normally I use flex trowel and a bit of plastic to run up it? If anyone else does them differently please let me know, hoping for a nifty little idea that I've not seen done before, thankyou please
 
Its all in the angle of your stroke . when you bring the trowel onto the curve in a horizontal movement try and bring it up on the diagonal reducing the angle of blade .work your way down like this. Hope that makes sense, if not just use a bit of plastic.:confused:
 
beader said:
Its all in the angle of your stroke . when you bring the trowel onto the curve in a horizontal movement try and bring it up on the diagonal reducing the angle of blade .work your way down like this. Hope that makes sense, if not just use a bit of plastic.:confused:
Click to expand...
Can you put that on a voice mail in a husky voice
 
To be honest I like doing these corners and they look good when finished but I always like to coat them out with easifill and sand them to make it that much better :-( That makes me a bad person I know :-(
 
I.d get that with with steel. Did one where they wanted breast boarding but corners round . So i boarded it leaving boards short . Rounded corners with bonding. Wrapped scrim round corners n skimmed it . Came up a treaat
 
Cornelius said:
What makes those trowels more preferable to a normal plazzi old bean? If I make an order today I could get it for Saturday (y)
Click to expand...

It's some sort of science or it could be some form of magic or witchcraft or maybe its the positive particle vibrations , I do know they work a lot better then they look like there going to.
I normally hide it in the bottom of my tool box to stop the other trades laughing at me :oops:.

Some might say they work a bit to well.
Paint that ya filthy animals :frenetico:


Skimming external curve
Skimming external curve
 
scottie5 said:
It's some sort of science or it could be some form of magic or witchcraft or maybe its the positive particle vibrations , I do know they work a lot better then they look like there going to.
I normally hide it in the bottom of my tool box to stop the other trades laughing at me :oops:.

Some might say they work a bit to well.
Paint that ya filthy animals :frenetico:


View attachment 19531View attachment 19532
Click to expand...

Woo hoo. Decoratormon gonna fetch you some good lovin when he catch up wit yo ass.


Link Removed
 
Cornelius said:
What makes those trowels more preferable to a normal plazzi old bean? If I make an order today I could get it for Saturday (y)
Click to expand...


Just borrow mine bud, try before you buy . When's the job? I can leave in a bucket on my drive......next to a trail of sweeties....just follow the sweeties
 
Olican said:
Just borrow mine bud, try before you buy . When's the job? I can leave in a bucket on my drive......next to a trail of sweeties....just follow the sweeties
Click to expand...
:) The job is Saturday mate if I could borrow it that would be great cheers (y)
 
That looks like a 3/4" (ish) radius corner correct? Most of our corners are bullnose and I run external corner tools on them. I have a few different radius ones and they do great.

For 3/4 I use this.

https://www.amazon.com/gp/aw/d/B008...lnose+tool&dpPl=1&dpID=31AKCDEI3EL&ref=plSrch

If you need something different you could give this a try. It has a lot of options.


Link Removed

The doorway pic has 3/4 radius corner. Hope it's visible.
 

Attachments

  • Skimming external curve
    20170824_153613.webp
    31.2 KB · Views: 262
Heritage Plasters said:
That looks like a 3/4" (ish) radius corner correct? Most of our corners are bullnose and I run external corner tools on them. I have a few different radius ones and they do great.

For 3/4 I use this.

https://www.amazon.com/gp/aw/d/B008...lnose+tool&dpPl=1&dpID=31AKCDEI3EL&ref=plSrch

If you need something different you could give this a try. It has a lot of options.


Link Removed

The doorway pic has 3/4 radius corner. Hope it's visible.
Click to expand...
That's ideal isn't it, it would be handy to have a collection of those trowels for when the need arises, the little hand held thing would be useful aswell
 
I agree with @beader it's how you angle and glide your trowel around the bullnose or curve. I love doing them but i love anything with curves. Especially milfs oooooooo I love a curvy milf me !!! Right cold shower time but not with those two blokes in the other pic licking grouting ffs :rolleyes:
 
Heritage Plasters said:
That looks like a 3/4" (ish) radius corner correct? Most of our corners are bullnose and I run external corner tools on them. I have a few different radius ones and they do great.

For 3/4 I use this.

https://www.amazon.com/gp/aw/d/B008...lnose+tool&dpPl=1&dpID=31AKCDEI3EL&ref=plSrch

If you need something different you could give this a try. It has a lot of options.


Link Removed

The doorway pic has 3/4 radius corner. Hope it's visible.
Click to expand...
Looks lovley that mate
 
scottie5 said:
It's some sort of science or it could be some form of magic or witchcraft or maybe its the positive particle vibrations , I do know they work a lot better then they look like there going to.
I normally hide it in the bottom of my tool box to stop the other trades laughing at me :oops:.

Some might say they work a bit to well.
Paint that ya filthy animals :frenetico:


View attachment 19531View attachment 19532
Click to expand...
Ohhhh, that has just cured my 'licking window addiction' - now I've just got to find a shiny smooth wall like that.
 
You must log in or register to reply here.
Back
Top