Skimming bullnose corners

[Dave5o]

Did the bullnoses today, used a rubble sack cut into a strip, on wet trowel I splashed water on bullnose and run plastic up and down, came out a f**kin treat. Customer made up.

Thanks for that good tip.

I,ve got to skim an artex bulkhead with a bullnose on it part of a stairwell, always do the wet bag run over with these. Not worth getting them plastic bullnose trims chance's of the profile fitting must be 1 in a million. but if they come out to s**t will go back on it with some 120grit for a smooth up. Will take a pic if comes out all right....lol

 

[bubbles65]

marra is short for mate, but, err..........longer:RpS_crying:

 

[Jace]

oh one of them long cut short cut thingys :RpS_wink: