Hello...
I am building a timber frame house i the next few months and the whole outside is basically rendered. (abouyt 175m2)
Having looked about and been down to a few suppliers I am frankly a bit bewildered about the number of options for this (and the cost)
:RpS_scared:
Basically the house is built from 140mm stud with 9mm OSB external board and breather paper. then we intend to nail a 50mm vertical batten to the outside to form a cavity and then fix dpc to the batten..
Then comes the confusion... i basically want a fine scraped finish in off white as this link below shows :
Disclaimer
Weber technical tell me that you cant use a backing board on a Timber frame house ?
Basically I am looking for the best finish at the lowest cost !!
please help...
I am building a timber frame house i the next few months and the whole outside is basically rendered. (abouyt 175m2)
Having looked about and been down to a few suppliers I am frankly a bit bewildered about the number of options for this (and the cost)
:RpS_scared:
Basically the house is built from 140mm stud with 9mm OSB external board and breather paper. then we intend to nail a 50mm vertical batten to the outside to form a cavity and then fix dpc to the batten..
Then comes the confusion... i basically want a fine scraped finish in off white as this link below shows :
Disclaimer
Weber technical tell me that you cant use a backing board on a Timber frame house ?
Basically I am looking for the best finish at the lowest cost !!
please help...