Power sponge on Mono

[FreeD]

Anybody ever got the power sponge on mono after barring? wondered what it looks like instead of scratch back. Any pics?

X

 

[Dansouthcoast84]

think @Wezly has done this on garden walls

 

[Rigsby]

I have heard of it on Monorex GF but I think it might tear on normal mono.

 

[Andy0705]

We have done it with monoblanco and GM will dig out some pics

 

[FreeD]

Be good to see some pics, thats what I thought Rigsby, Monorex would be best.

 

[MikeAtthis]

here's some of OCR with the power sponge


Sent from my iPhone using Tapatalk

 

[Rigsby]

Tardex might help. It keeps the surface open longer.

 

[Dansouthcoast84]

here's some of OCR with the power sponge


Sent from my iPhone using Tapatalk

quite a heavy grain on that then?

 

[MikeAtthis]

quite a heavy grain on that then?

that was from an inch away with the camera lol

 

[Dansouthcoast84]

that was from an inch away with the camera lol

do you use the same camera and lens to take pictures of you wanger

 

[MikeAtthis]

do you use the same camera and lens to take pictures of you wanger

a wide angle one for the girth lol

 

[Orangemachineman]

I have used it on parex lime render
Comes up decent

 

[Rigsby]

That looks like Kilsaren durarend rubbed up wet. Spat at the right moment then light sponge will make it look like Webers ocr without the cracks.

 

[BigK]

Done k rend with normal sponge and looked well on some bands and quoins.
Good to note that the smallest drop of water on it after sponging until it's nearly gone off, and you will get very noticeable colour changes!


Sent from my iPhone using Tapatalk

 

[vfr12]

Never trust power float for final finish

 

[FreeD]

here's some of OCR with the power sponge


Sent from my iPhone using Tapatalk

Weber OCR?

 

[FreeD]

Never trust power float for final finish

Disagree...I've done loads which have been ruled then power sponged, then painted. They look no worse than any others when the sun shines across them that have been finished with float and sponge.