New speedskims

[jeanclaudevangyproc]

Just like to thank Scott for my new speedskims that arrived today [emoji106]

Sent from my iPhone using Tapatalk

 

[Speedskim]

Just like to thank Scott for my new speedskims that arrived today [emoji106]

Sent from my iPhone using Tapatalk

Thanks mate, you're very welcome!
Sorry it took so long to get the prizes out, wanted to get the All New SF off the ground and it took longer than expected.
The 0.3mm stainless steel tip has 4mm diameter radius ends.
The spring steel used is 'safe edge', but also buffed after assembly, meaning the All New SF is good to go straight out of the box!
Lots coming up in terms of associated products soon - so next years prizes should be quite exciting...
Hope you enjoy using the product - should save your elbow, and give you more time to use that Speedskim mug! ;-)

 

[jeanclaudevangyproc]

Thanks mate, you're very welcome!
Sorry it took so long to get the prizes out, wanted to get the All New SF off the ground and it took longer than expected.
The 0.3mm stainless steel tip has 4mm diameter radius ends.
The spring steel used is 'safe edge', but also buffed after assembly, meaning the All New SF is good to go straight out of the box!
Lots coming up in terms of associated products soon - so next years prizes should be quite exciting...
Hope you enjoy using the product - should save your elbow, and give you more time to use that Speedskim mug! ;-)

Looking forward to using it [emoji106] still using my blue blades everyday near enough think they may get demoted now though [emoji23] thanks again Scott top man


Sent from my iPhone using Tapatalk

 

[Speedskim]

Cheers mate
A note to others who aren't familiar with the Speedskim product; use the ST and SF ranges as a System and you'll be home before you know it! ££ ;-)

 

[themucky1]

Cheers mate
A note to others who aren't familiar with the Speedskim product; use the ST and SF ranges as a System and you'll be home before you know it! ££ ;-)

What's the difference between the st and the sf?


Sent from my iPhone using Tapatalk

 

[Speedskim]

What's the difference between the st and the sf?


Sent from my iPhone using Tapatalk

Hi mate, the ST is PVC only blade designed to flatten and rule off.
The SF is composite design PVC, with 55mm x 0.3mm stainless steel tip for fine finishing and polishing.
The ST reduces surface moisture which allows you to complete the initial stages of the work much quicker.
The SF then gives a smooth seamless finish.
Used as a System you can increase your out output; but most importantly reduce the unnecessary strain on your body ;-)

 

[themucky1]

Got ya, I've got the st then


Sent from my iPhone using Tapatalk

 

[Rossi46]

I'm still on the first Speedskims Scott and they're still going strong. Right back from the very beginning!
I've cut a 1.2m into an 800 and 400 which I find are good sizes. Great tool! Will get round to trying the new ones soon All the best

 

[Speedskim]

Haha - Good to hear they're still going strong The older versions weren't as refined as we wanted but we had to start somewhere ;-)
The New Generation Speedskim's have double button quick release end caps and the blades have co-ex rubber seals to stop silt ingress, keeping blades nice and straight.
As a note among other stuff we are launching 450mm and 900mm size ranges spring 2017!

 

[jeanclaudevangyproc]

Haha - Good to hear they're still going strong The older versions weren't as refined as we wanted but we had to start somewhere ;-)
The New Generation Speedskim's have double button quick release end caps and the blades have co-ex rubber seals to stop silt ingress, keeping blades nice and straight.
As a note among other stuff we are launching 450mm and 900mm size ranges spring 2017!

Have you thought of making some type of bag for them like a bag spirit levels etc come in Scott? Just keeps them all together and safe in transit also easier to take them in and out of jobs


Sent from my iPhone using Tapatalk

 

[Olican]

Have you thought of making some type of bag for them like a bag spirit levels etc come in Scott? Just keeps them all together and safe in transit also easier to take them in and out of jobs


Sent from my iPhone using Tapatalk

I keep mine in a piece of celotex and the other in a piece of eps insulation, not quite designer but keeps them safe in the van

 

[Speedskim]

Yeah, absolutely we have designed something quite nifty that will keep your Speedskim's tidy and safe.
Looks really cool too, so should be nice addition to your plastering kit.
Keep you posted on this, hopefully available spring 2017 too! ;-)

 

[Olican]

Yeah, absolutely we have designed something quite nifty that will keep your Speedskim's tidy and safe.
Looks really cool too, so should be nice addition to your plastering kit.
Keep you posted on this, hopefully available spring 2017 too! ;-)

Will they look anything like these?

 

[raggles]

Will they look anything like these?

View attachment 14775 View attachment 14776

It always warms my heart so see someone else who cares for their tools in the same diligent way as me by spending 30mins each day cleaning them

 

[Natwasere]

Will they look anything like these?

View attachment 14775 View attachment 14776

Suddenly I feel like I look after my tools ok

 

[Natwasere]

Keep mine on a shelf up high with the plastic covers on, haven't damaged them yet

 

[Formby plastering]

I

Keep mine on a shelf up high with the plastic covers on, haven't damaged them yet

Houghton my van was a tip

 

[Natwasere]

I

Houghton my van was a tip

Cheeky f**k lol its throw it in friday

 

[Formby plastering]

Haha could of swore I seen another pic the other thread which was worse

 

[Natwasere]

Haha could of swore I seen another pic the other thread which was worse

Yeah you are right that was a very very bad day. It's actually reasonably tidy atm everything pretty much where it should be

 

[Natwasere]

These sf's do look nice though. Will probably give in and buy one or 2 before long. Love my sf's but still not 100% sure how to use it them properly yet.

 

[PlasterCraftDundee]

I hate an untidy van. Everything has to be in its place!

 

[Natwasere]

I just can't see that being possible in my world. Always got Buckets and plaster etc on floor

 

[algeeman]

I hate an untidy van. Everything has to be in its place!
View attachment 14787

We used to get 5 lads 2 water barrels and 2 wheel barrows in the back of that .
How times have changed !!!

 

[PlasterCraftDundee]

When i got my van racked out I planned it so I could always have a clear floor space

 

[Natwasere]

I worked out the back of people carriers and 4x4s for years this is the first nice sized van I've owned and it's still full of crap.... need a bigger van

 

[algeeman]

I worked out the back of people carriers and 4x4s for years this is the first nice sized van I've owned and it's still full of crap.... need a bigger van

Have you got a gang of lads ?

 

[Natwasere]

Have you got a gang of lads ?

No just me. If I ever get a labourer that will be one of their jobs lol

 

[Marshy]

I hate an untidy van. Everything has to be in its place!
View attachment 14787

Not a patch on @Wesley or has he left??

 

[Marshy]

@Wezly I meant ffs you could eat off the floor in his vans

 

[Formby plastering]

You mean there's neater vans out there I need to sort my s**t out

 

[Speedskim]

Will they look anything like these?

View attachment 14775 View attachment 14776

Oli...you are officially shortlisted for a free Speedskim case When they come out (hopefully Spring 2017), you are first in the queue! ;-)

 

[zolco]

In the mean time you could use one of these

Sent from my Nexus 6P using Tapatalk

 

[Olican]

Oli...you are officially shortlisted for a free Speedskim case When they come out (hopefully Spring 2017), you are first in the queue! ;-)


View attachment 14793

You are most kind sir [emoji106][emoji106]

 

[Speedskim]

In the mean time you could use one of these

Sent from my Nexus 6P using Tapatalk

It's a good shout
there are a few good solutions - lighting stand cases are also worth a look