My skimming

[algeeman]

Will see if it's the midi out of shape Monday as got a brand new one in garage. So will get it out for Mondays skim. I ordered 2 in November. Should last longer than 3 or 4 months??

depends how much your using them
I need 1 a month mate

 

[ChrispyUK]

I’m going back into production. Rossiflex was perfection. Although I reckon I could attach a horseshoe to a trowel handle and plasterers would buy it.

How much?

 

[choppa]

If in doubt .View attachment 44969
Get plastic outView attachment 44970

Shitter

 

[zombie]

If in doubt .View attachment 44969
Get plastic outView attachment 44970

Taught him everything he knows!

 

[Rossi46]

Taught him everything he knows!

Didn’t take long then

 

[choppa]

Taught him everything he knows!

He mega s**t then.

 

[zombie]

He mega s**t then.

The worse of the worse

 

[John j]

Taught him everything he knows!

Cheers mate. You get ye valentines card.. took a pic for ye incase it got lost in post

 

[John j]

The worse of the worse

I like to think i.m best at being worse

 

[JohnDoe]

depends how much your using them
I need 1 a month mate

If it is the midi I'll order 2 again then always got a spare. Impossible to keep away from beads ..............

 

[Rossi46]

imagine the revenue that’s being created because there’s so many buying extra tools just because BG knock out such shite plaster.

 

[JohnDoe]

If in doubt .Get plastic out

New plastic or how you get them scratches out of it?

 

[John j]

New plastic or how you get them scratches out of it?

Personally i think stick to 14 inch or less . Less blade less scratches. Most of time rub on plasterboard or finished wall gets em out if not Sand em but run em over plasterboard or finished wall before trying to finish a wall with em or it rips f**k out wall

 

[megamix]

Looks like your using the same mix 2nd coat & coupled with fookin about troweling up

Your welcome

I agree . Even on low suction I’ve found with multi finish you need to flatten off the first coat then mix up slightly wet new stuff to lay in . You can’t lay in with same mix on reskim. Drags too
Much

 

[tapit]

If it is the midi I'll order 2 again then always got a spare. Impossible to keep away from beads ..............

Might help if you cushion beads with tape?

 

[tapit]

In the future will we see skimming split up into separate trades?
one putting it on with an MT, next speedskim/spat operative followed by a flex finishing technician.

 

[Cockney]

Personally i think stick to 14 inch or less . Less blade less scratches. Most of time rub on plasterboard or finished wall gets em out if not Sand em but run em over plasterboard or finished wall before trying to finish a wall with em or it rips f**k out wall

Wtf you on about! You lay in with an 18inch plastic. Come on ffs

 

[John j]

Wtf you on about! You lay in with an 18inch plastic. Come on ffs

I dont even know any more

 

[Cockney]

I dont even know any more

Trust me just go back to basics mate. Stop dragging all them trowels about. 1 broken in carbon and another as a back up.

 

[John j]

Trust me just go back to basics mate. Stop dragging all them trowels about. 1 broken in carbon and another as a back up.

I just flatten with 18 . Takes a lot of work out of it for me

 

[zombie]

Plastic has changed my life @John j

 

[Cockney]

I just flatten with 18 . Takes a lot of work out of it for me

Wanna buy the 14

 

[John j]

Wanna buy the 14

No i want @Plasterers1StopShop to fetch a 20 inch plus out

 

[Rossi46]

How much . Might dip in to my ebike fund

Free fir you John

 

[Vincey]

Can i have trowel.



Think its got @Vincey He.s disappeared. Might be in bunker

Am away mate thought f**k this was fed up so got a late deal

 

[John j]

Free fir you John

You are ace. When i pick it up i.ll drop bike and you can sort it out . Love ye

 

[John j]

Am away mate thought f**k this was fed up so got a late deal
View attachment 44977

Your lass looks nice

 

[Smudger1]

Am away mate thought f**k this was fed up so got a late deal
View attachment 44977

Looks like Helmand province Vince, mines sign n everything dodgy ?

 

[John j]

Looks like Helmand province Vince?

Its cleethorpes

 

[John j]

Lmfao late deal to cleethorpes

 

[tapit]

Am away mate thought f**k this was fed up so got a late deal

Lmfao late deal to cleethorpes

YOU ENTERTAINING YERSEN?

 

[ChrispyUK]

Lmfao late deal to cleethorpes

Ive done Cleethorpes

 

[John j]

Ive done Cleethorpes

Were you from @ChrispyUK . I.ve had some good times at cleethorpes

 

[zombie]

Were you from @ChrispyUK . I.ve had some good times at cleethorpes

T.R.A.M.P

 

[ChrispyUK]

Were you from @ChrispyUK . I.ve had some good times at cleethorpes

Not f**k**g Cleethorpes. Done a few gigs up there though!