mtec m200

Share this page

s61 said:
We been spraying hardwall for the past couple of weeks. With the m200
Click to expand...
Can u fill the Hopper up full. Seen a video the other day on the mtec group. Bloke was putting half a bag in the Hopper at one end of the machine. But they where only half way down the wall.
 
theclemo said:
Can u fill the Hopper up full. Seen a video the other day on the mtec group. Bloke was putting half a bag in the Hopper at one end of the machine. But they where only half way down the wall.
Click to expand...

Unsure why they would have half a bag in at a time, but 100% yes the hopper can be filled up and you can even have an extension hopper. We have had issues with compacting in the past but have now designed a new conveying screw which eliminates this completely.

We also have a new one being made which also increases the output
 
Plasterers1StopShop said:
Unsure why they would have half a bag in at a time, but 100% yes the hopper can be filled up and you can even have an extension hopper. We have had issues with compacting in the past but have now designed a new conveying screw which eliminates this completely.

We also have a new one being made which also increases the output
Click to expand...
Will the new one be able to stand toe to toe with that new Ritmo which goes like stink (very fast output) ??
 
Marshy said:
Will the new one be able to stand toe to toe with that new Ritmo which goes like stink (very fast output) ??
Click to expand...

It is good to see the new improved Ritmo, certainly quicker than the last at 14l/min. The new one is currently 2l/min faster than the M200, I am confident in saying this will be matched
 
theclemo said:
Can u fill the Hopper up full. Seen a video the other day on the mtec group. Bloke was putting half a bag in the Hopper at one end of the machine. But they where only half way down the wall.
Click to expand...
Yea pal we had no problems the lad piles it up high, but it is all fresh gear the only problems we’ve had with tunnelling is when the bags are damp
 
Can the m200 spray hardwall or render at 15 bar with 15 mts hose on like the ritmo. Or do you have to spray wetter.
 
theclemo said:
Can the m200 spray hardwall or render at 15 bar with 15 mts hose on like the ritmo. Or do you have to spray wetter.
Click to expand...

You can spray at the same thickness or consistency as a Ritmo (despite what some other machine dealers may say)

We don’t normally work off 1m per bar pressure on the M200 due to the make up of the machine. This theory is mainly for 3 phase machines working off 25m hoses.

It also goes out the window when using bigger hoses
 
Plasterers1StopShop said:
You can spray at the same thickness or consistency as a Ritmo (despite what some other machine dealers may say)

We don’t normally work off 1m per bar pressure on the M200 due to the make up of the machine. This theory is mainly for 3 phase machines working off 25m hoses.

It also goes out the window when using bigger hoses
Click to expand...
I might be using one next week if I can get the time to go. The slimline and the m200 will be on site. I'll have a good play with the 2 of them. 1 bother has the ritmo the other the m200. Family wars lol
 
theclemo said:
I might be using one next week if I can get the time to go. The slimline and the m200 will be on site. I'll have a good play with the 2 of them. 1 bother has the ritmo the other the m200. Family wars lol (y)
Click to expand...
I'm keen for your feedback on this mate
 
Marshy said:
I'm keen for your feedback on this mate
Click to expand...
No problem marshy. It will be a honest one. I've used a lot pft machines and diesel machines. Be good to get a go at the m200. Be nice to see what I make of it. Am not In to am pft or am mtec man could not give a f**k about all that. Am happy with the ritmo. I'd pull it out b4 I'd pull the diesel out tbh.
 
theclemo said:
No problem marshy. It will be a honest one. I've used a lot pft machines and diesel machines. Be good to get a go at the m200. Be nice to see what I make of it. Am not In to am pft or am mtec man could not give a f**k about all that. Am happy with the ritmo. I'd pull it out b4 I'd pull the diesel out tbh.
Click to expand...
I'd pull my cock out first lol
 
I just can’t get to grip using hardwall thru it! Keeping at 500 on the water gage, sprays for 15 mins then the machines starts to back fill
 
Joce said:
I just can’t get to grip using hardwall thru it! Keeping at 500 on the water gage, sprays for 15 mins then the machines starts to back fill
Click to expand...
We found the water setting at 470 to be about right. We set the water, put some water in the pipes connected everything up put the powder in steady and just fired it into a tub until the consistency is right and then just fire it on the wall
 
Joce said:
I just can’t get to grip using hardwall thru it! Keeping at 500 on the water gage, sprays for 15 mins then the machines starts to back fill
Click to expand...

Give Andy a call on 07966394864

If you’re really struggling mate, we can arrange another training session at our depot FOC for you
 
You must log in or register to reply here.
Top