djfleming22
Well-Known Member
Just wondering if these are any good or just a waste of time
Only on uprights corners could be a pain
The wheel part drops down so it goes into cornersOnly on uprights corners could be a pain
I’m getting one
They are absolutely brilliant. Great on internal angles. I put off getting one for a couple of years cos I thought it would be useless tatt and was so wrong.
Don't think you can get that one here Lurpak but the other one is Marshalltown so most places sell them
What they like when s**t scrim frays off? Them annoying bits that strangle your fingers. Or do you slice the side of the rolls before putting them in?They are absolutely brilliant. Great on internal angles. I put off getting one for a couple of years cos I thought it would be useless tatt and was so wrong.
I have yes but tbh ain't done much re skims over last few years. You have to make sure you use good tape like B G's or Euro scrim cos the diameter of the cardboard roll on the tape needs to be good or if you turn machine wrong way it will drop off..Do you use on re skim
regardless of the make of tape i always put 2 score lines either side on a roll of tape to prevent this.What they like when s**t scrim frays off? Them annoying bits that strangle your fingers. Or do you slice the side of the rolls before putting them in?
Same here m8Well I am still ...........using mine , despite the wheel can't be used anymore, glue from the tape is all over the rolls and around and still have to use my hand to make sure the tape sticks to the board.
total waste of time and money had one the glue clogges it upJust wondering if these are any good or just a waste of time
View attachment 30274
Just wondering if these are any good or just a waste of time
View attachment 30274
...but Marshalltown is American innit?Me pal has flooring company and imports alot of American tools. Much better gear
...but Marshalltown is American innit?