Hopper and Compressor for thin coat

[Andy M]

As above ,anyone use these for 1.5 thin coat or are they not suitable cheers.

 

[Groove37]

U got lab

 

[Andy M]

Yes pal

 

[Dansouthcoast84]

ive just started using ritmo for 1.5mm still trying to get it less tyroleany. used a hopper and compressor for smaller areas.

 

[Arti]

I've done loads with a pft compressor and hopper but using the ritmo like Dan for bigger jobs

 

[Rossi46]

I use a hopper and compressor sometimes. I don’t mind the speed. I’m in no rush anyway.

 

[Rigsby]

I have used it for both sprayed on texture and for applying to be rubbed up.

 

[Andy M]

I have a ritmo what would I need to add on a thin coat set up?

 

[Vincey]

Think it’s this one andy but someone correct me if I’m wrong, I been looking on Wales site for the same set up as you this week tbf his site is quite easy to flick through for stuff , not sure if I’d have to change to a different rs too though for my Ritmo M

Short spraying gun Texturing and Primers – PFT Wales Website

www.pftplasteringmachines.com

 

[Andy M]

Think it’s this one andy but someone correct me if I’m wrong, I been looking on Wales site for the same set up as you this week tbf his site is quite easy to flick through for stuff , not sure if I’d have to change to a different rs too though for my Ritmo M

Short spraying gun Texturing and Primers – PFT Wales Website

www.pftplasteringmachines.com

Cool,does it need a different hose As well.Apologies,don't do tons of thin coat but got a job with good areas and minimal maskng but dont like handballing the s**t.

 

[Vincey]

Cool,does it need a different hose As well.Apologies,don't do tons of thin coat but got a job with good areas and minimal maskng but dont like handballing the s**t.

Not sure myself mate but the others on this thread will put us right

 

[Arti]

Same hose but you need a remote cable and a separate compressor

 

[lurpak]

Because all ways say i do it ok ,he's taking me for a c**t so i do the same I'll , I said to hi.m 290 ,then he said to me 150

 

[Andy M]

Because all ways say i do it ok ,he's taking me for a c**t so i do the same I'll , I said to hi.m 290 ,then he said to me 150

WTF

 

[lurpak]

WTF

c**t