Hilti Guns for sale

[TonyM]

2x Bare Hilti SD5000s in tool cases.
One is 2014, one is 2018 . Both working fine. Also 1x new shape SMD57 and 1x original SDM2. Each gun with cone attachment too.
Gun and case £100 + carriage (£10) each
SMD57 £70
SDM2 £40
Located in Cornwall if collecting.
PM Please.

 

[Stewie03]

@John j

 

[Spudknit]

@Casper

 

[John j]

@John j

Can't afford batterys

 

[TonyM]

Sold

 

[MakeItSmooth]

Sold

One born every minute!

 

[MakeItSmooth]

Are you:

Updating
Retiring
Leaving Hilti?

I know you do a boatload of boarding, so I'm curious!

 

[TonyM]

Are you:

Updating
Retiring
Leaving Hilti?

I know you do a boatload of boarding, so I'm curious!

Bought the new lighter guns a while back . These were spares just sitting in my unit. Sold them and a taping corner finisher that I haven’t used for years, and have bought myself a Festool insulation saw with the proceeds.

 

[jamesthefirst]

Will you take a £1,000 mate? Final offer!

 

[themucky1]

Bought the new lighter guns a while back . These were spares just sitting in my unit. Sold them and a taping corner finisher that I haven’t used for years, and have bought myself a Festool insulation saw with the proceeds.

Post a picture of that saw

 

[TonyM]

Will you take a £1,000 mate? Final offer!

£1000.23p

 

[TonyM]

Post a picture of that saw

 

[TonyM]

Got as s**t load of celotex to do soon

 

[themucky1]

Got as s**t load of celotex to do soon

You reckon that would work for eps?

 

[TonyM]

You reckon that would work for eps?

Yeah. It arrived today. It’s that f**k**g sharp, I picked up the blade and cut myself

 

[MakeItSmooth]

Got as s**t load of celotex to do soon

Fkn 'ell - I didn't realise Moulinex went cordless!

 

[themucky1]

Yeah. It arrived today. It’s that f**k**g sharp, I picked up the blade and cut myself

Do you think it would cut eps cleanly as in no polystyrene flying about?

 

[essexandy]

Yeah. It arrived today. It’s that f**k**g sharp, I picked up the blade and cut myself

@John j asked me to ask you how much the replacement blades cost?

 

[Vincey]

Wish I could afford Hilti tools

 

[essexandy]

Wish I could afford Hilti tools

Stop buying other pointless, unnecessary shite and you'll be able to.

 

[TonyM]

@John j asked me to ask you how much the replacement blades cost?

£70

 

[TonyM]

Do you think it would cut eps cleanly as in no polystyrene flying about?

Reckon so

 

[essexandy]

Do you think it would cut eps cleanly as in no polystyrene flying about?

I read some blurb on them and they mention cutting eps with it.

 

[MakeItSmooth]

£70

Depends how long they last, obviously, but, by Festool's standards, £70 isn't super-crazy....

 

[TonyM]

It works. Got to say that in thinner cellotex, a hand saw is quicker though.

 

[tapit]

Would an "alligator saw" with a hacksaw blade in work?

 

[MakeItSmooth]

Would an "alligator saw" with a hacksaw blade in work?

Would wander too much along the length (and depth) of the cut.

Would create much more dust.

Would do a shite job of carving your Sunday roast.

 

[tapit]

Would wander too much along the length (and depth) of the cut.

Would create much more dust.

Would do a shite job of carving your Sunday roast.

Back to the drawing board then!

 

[MakeItSmooth]

Back to the drawing board then!

Well, it would be a cheaper tool, to be fair, but I'm sure Tony will see a return on his investment within 6 months or so, what with the amount of new boarding he does (with installation often installed at same time)

 

[tapit]

Well, it would be a cheaper tool, to be fair, but I'm sure Tony will see a return on his investment within 6 months or so, what with the amount of new boarding he does (with installation often installed at same time)

I do very little, usually just hand saw, but if I did, day in day out, I would go for best solution on the market.