Feb 2 in 1 bottle

[Jimbo95]

There’s a feb 2 in 1 bottle both waterproofer and plasticiser. I heard your meant to put waterproofer in scratch coat and plasticiser in top coat. This 2 in 1 should be alright for both coats right?

 

[smoother09]

There's loads mate silka do a rendermix waterproof and plasticiser

 

[smoother09]

Think Feb do a rendermix too

 

[Jimbo95]

C

There's loads mate silka do a rendermix waterproof and plasticiser

Cheers mate but is it ok to use in both coats?

 

[church]

Never use a plasticiser in a render .

 

[McPlaster]

Never use a plasticiser in a render .

Why not Church?

 

[essexandy]

Never use a plasticiser in a render .

I always have.

 

[church]

Why not Church?

So many reasons but weakens the mix , id say is probably is my biggest worry but i guess each to there own .

 

[The Hobo]

sbr for me

 

[Lastlaff]

Hydrated lime for me

 

[smoother09]

Never use a plasticiser in a render .

I don't personally with the particular sand I use just waterproofer and lime

 

[essexandy]

I don't personally with the particular sand I use just waterproofer and lime

But is your waterproofer also a plasticiser, most are?

 

[smoother09]

But is your waterproofer also a plasticiser, most are?

Not telling! I've given you too many tips over the years! Stabilisers are off Andy u on ya own.

 

[essexandy]

Not telling! I've given you too many tips over the years! Stabilisers are off Andy u on ya own.

You don't know do you?
What a chancer. (no offense @ChrispyUK )

 

[smoother09]

You don't know do you?
What a chancer. (no offense @ChrispyUK )

No not all waterproofers have plasticiser in Andy is that better!

 

[smoother09]

Depending on the time of year this is my go to especially in the hotter months!

 

[smoother09]

You don't know do you?
What a chancer. (no offense @ChrispyUK )

Bit of thincoat I'm on with at minute expert in that field too

 

[smoother09]

I could put hundreds of pics up and you wouldn't be able to argue with the quality my customers have orgasms over the work I produce that's all that matters!

 

[smoother09]

Bit of thincoat I'm on with at minute expert in that field too View attachment 65722

Get zooming in I know everyone likes a good fault finding! Only the strong survive lest we not forget the heroes of the plastering world rip smoother!

 

[smoother09]

Work after work recommendation after recommendation it's so bad my phone stays on silent and I pick through the voicemails!

 

[essexandy]

No not all waterproofers have plasticiser in Andy is that better!

Not all, but unfortunately most do nowadays.
The Cementone one is good gear. I particularly like the Everbuild 3 in 1. The retarder in it helps get moisture back into the gear on the wall in hot weather. I only use it in the backing coat though.

 

[bobski]

Not all, but unfortunately most do nowadays.
The Cementone one is good gear. I particularly like the Everbuild 3 in 1. The retarder in it helps get moisture back into the gear on the wall in hot weather. I only use it in the backing coat though.

I like freeflo, decent gear.



I find everbuild 3 in 1 is good, it dries harder too.

Doesn't seem to introduce TOO much air into the mix.

Also it's one of the multi purpose ones that's a salt inhibitor too, so that you can use for damp work aswell.

It's higher regarded that their actual waterproofer.

 

[Retired Spread]

Get zooming in I know everyone likes a good fault finding! Only the strong survive lest we not forget the heroes of the plastering world rip smoother!

bet ye wouldn't be this smug with uplighters on it at night

 

[smoother09]

bet ye wouldn't be this smug with uplighters on it at night

Yes I would!