EZE, speed skim or spatula??? ☁️

[Wingerwill11]

Alright guys... Sure these Q's all been asked before but just wanna check a few things before order one.
Looking into getting the EZE spat, seems that 800mm is the preferred size??
Was late getting meself onto a s*p*r*lex, all the lads was using them but stuck to me MT, Untill I had ago with one lads,and the skim came up beautiful. Got meself one, and wasn't getting a great finish, it as it was brand new! Abit wavy!
Got it on some S & C render for a week or 2 and tried it again and that really did the trick, so question is , would the EZE spat need to be broken in the sameway??
Also, I see these 'N-e- la spatulas' , for a fraction of the price ... Not bothered aboutspending the money like, but are they anything on the EZE?
And what about the speed skim? Is this much kop?
A lot Q's, but I just seem to be going round and round here, with all these spats, and speed skims!
Cheers

 

[GrantyBoy]

Is that you again rwf0067.

Nice trolling trolololol

 

[Marshy]

Think after reading this shite is why (apart from you) @GrantyBoy is why no body posted mate

 

[zombie]

Until I see a video showing someone finish from start to finish the troweling process with an eze spat on a ceiling im holding off buying...

In the past I've bought an grey speedskim and a plaziflex...both useful but if I'm really really honest all I found is that I just touch the wall more not actually reducing the work bit increasing it as I end up still troweling same amount of times...

For walls im back putting on tight and neat reducing need to flatten 1st coat and 3 trowels with my mt job done...

I would like to finish ceilings with a long handled spat though but not buying for now as fed up of buying new tools!

 

[Marshy]

Until I see a video showing someone finish from start to finish the troweling process with an eze spat on a ceiling im holding off buying...

In the past I've bought an grey speedskim and a plaziflex...both useful but if I'm really really honest all I found is that I just touch the wall more not actually reducing the work bit increasing it as I end up still troweling same amount of times...

For walls im back putting on tight and neat reducing need to flatten 1st coat and 3 trowels with my mt job done...

I would like to finish ceilings with a long handled spat though but not buying for now as fed up of buying new tools!

If @Plasterers1StopShop offer me enough money i'l do is plus perks and beer obviously

 

[Marshy]

@zombie it is possible to finish with them (always better to trowel the angles in mind)

 

[zombie]

Don't say that @ marshy I'm fed up of buying new gizmos grrrrrrr

There again as they say without a video it never happened!

Have I just showed my age does anyone actusly say video any more!