EHI same day scrape

[Jgreenplastering]

Alright lads

Using my ritmo L for first time on 3 small panels around 20m2 each.

We have EHI over Matie at 10mm scraped finish.

Matie was put on last week and hoping to finish this week.

Would I be able to scrape same day at 10mm?
Or would accelerator def help?

Or should I just stick to spraying afternoon and scraping in morning with no accelerator?



Sent from my iPhone using Tapatalk

 

[User___removed]

Alright lads

Using my ritmo L for first time on 3 small panels around 20m2 each.

We have EHI over Matie at 10mm scraped finish.

Matie was put on last week and hoping to finish this week.

Would I be able to scrape same day at 10mm?
Or would accelerator def help?

Or should I just stick to spraying afternoon and scraping in morning with no accelerator?



Sent from my iPhone using Tapatalk

Parex is a slow setter so I would go afternoon
Spray unless you get on site at 6 to spray at 7!!!

 

[Rigsby]

Spray as late in the day as possible and get scraping at dawn.

 

[Wezly]

EHI is slower than slow, doesn't matter what time it goes on it's an overnighter at these temps, especially over maite.

 

[owls]

As above, spray in morning to scratch back next afternoon,
It's one if the slowest setting gear about,especially this time of year, hasn't got above 5c today for us.

 

[FreeD]

As above, spray in morning to scratch back next afternoon,
It's one if the slowest setting gear about,especially this time of year, hasn't got above 5c today for us.

Good product for the first spray...good luck Jordan can't be any worse than what happened on my first spray...I got an unwelcome facial!!