Aqua panel

[matt01]

Got to put up board then aqua panels to new stud work in a bathroom.
The panels are getting tiled, should I plaster these or not. As far as I'm aware there is no need to plaster over the panels but don't want to piss the tiler off.
Cheers

 

[richardbrown]

no just put them up nice and neat and counter sink the screws

 

[matt01]

Cheers Rich.

 

[richardbrown]

no problem

 

[flat boy skim]

Got to put up board then aqua panels to new stud work in a bathroom.
The panels are getting tiled, should I plaster these or not. As far as I'm aware there is no need to plaster over the panels but don't want to (french word) the tiler off.
Cheers

w t f lol some people should stick to there day job :

 

[spunky]

would you skim mr boards flat boy

 

[flat boy skim]

would you skim mr boards flat boy

only after applying thistle bond it or wba , is this a trick question then

 

[spunky]

would you skim hardibacker flat boy and no its not a trick question

 

[flat boy skim]

would you skim hardibacker flat boy and no its not a trick question

no theres no point as its not put there as a board to be skimmed but to have a tile stuck to it , if a builder asked me to i would prob pva it first though as it is onle a cement based board after all ??? y

 

[spunky]

what is the first coat ratio of s.c over timber framed building and riblathe ?

 

[flat boy skim]

what is the first coat ratio of s.c over timber framed building and riblathe ?

i no its a strong mix like 3 and 1 with a bit of lime and its the only background you can top with a stronger coat

 

[spunky]

its a strong mix metal takes a strong mix 3-1 plus a 1/4 shovel of lime .....its the only background you can top with a stronger mix too

 

[flat boy skim]

is that my 10 min course compleated no then i am a fully qualified plasterer now